Photolysis Dynamics Laser Chemistry Lab

We utilize single molecule spectroscopy combined with time-correlated single-photon counting to probe electron transfer (ET) kinetics from CdSe/ZnS (core/shell) quantum dots (QDs) to TiO2 through various lengths of linker molecules. The QD-linker-TiO2 complexes with varied linker length, linker structure, and QD size are fabricated by a surface-based stepwise method to show control of the rate and of the magnitude of fluctuations of photo-induced ET at the single molecule level. The ET rate constants are determined to be 2.8×107, 1.9×107, and 3.5×106s-1 for the chain length of 1.5, 6.2 and 13.8Å, respectively. The electronic coupling strengths between QDs and TiO2 are further calculated to be 3.68, 3.60, and 1.59cm-1 for the three different chain lengths by using the Marcus ET model. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Electron transfer (ET) kinetics of CdSe/ZnS core/shell quantum dots (QDs) on bare coverslips and a TiO 2 nanoparticle-coated thin film has been investigated at the single-molecule level. The QDs prepared have three different diameters of 3.6, 4.6, and 6.4 nm. The trajectories of fluorescence intensity are acquired with respect to the arrival time. The on-time events and subsequent fluorescence lifetimes are shorter with decreasing size. Given the lifetime measurements for QDs on glass and TiO 2, the rate constant of ET from QDs to TiO 2 may be determined to be 1.3×10 7, 6.0×10 6, and 4.7×10 6 s -1 for the increasing sizes of the QDs. The plot of on-time probability density versus arrival time is characterized by power-law statistics in the short time region and a bending tail in the long time region. Marcus's ET model is employed to satisfactorily fit the bending tail behavior and to further calculate the ET rate constants. The theoretical counterparts for the different sizes are 1.4×10 7, 6.4×10 6, and 1.9×10 6 s -1, showing good agreement with the experimental results. Going dotty: Electron transfer kinetics of CdSe/ZnS core/shell quantum dots (QDs) on bare coverslips and on TiO 2 nanoparticle coated thin films have been investigated at the single-molecule level. As the size of the QDs changes, the shift in the valence band (VB) energy is less significant than the shift in the conduction band (CB) energy. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Quantum decoherence can be viewed as the mechanism responsible for the quantum-to-classical transition as the initially prepared quantum state interacts with its environment in an irreversible manner. One of the most common mechanisms responsible for the macroscopically observed decoherence involves collisions of an atom or molecule, initially prepared in a coherent superposition of states, with gas particles. In this work, a coherent superposition of quantum internal states of NO molecules is prepared by the interaction between the molecule with both a static and a radiofrequency electric field. Subsequently, NO + Ar collision decoherence experiments are investigated by measuring the loss of coherence as a function of the number of collisions. Data analysis using a model based on the interaction potential of the collisional partners allowed to unravel the molecular mechanism responsible for the loss of coherence in the prepared NO quantum superposition of internal states. The relevance of the present work relies on several aspects. On the one hand, the use of radio-waves introduces a new way for the production of coherent beams. On the other hand, the employed methodology could be useful in investigating the Stereodynamics of chemical reactions with coherent reagents. © 2013 American Chemical Society.

Ion imaging coupled with (2 + 1) resonance-enhanced multiphoton ionization (REMPI) technique is employed to probe CO(v″ = 0) fragments at different rotational levels following photodissociation of methyl formate (HCOOCH 3) at 234 nm. When the rotational level, J″CO, is larger than 24, only a broad translational energy distribution extending beyond 70 kcal mol-1 with an average energy of about 23 kcal mol -1 appears. The dissociation process is initiated on the energetic ground state HCOOCH3 that surpasses a tight transition state along the reaction coordinate prior to breaking into CO + CH3OH. This molecular dissociation pathway accounts for the CO fragment with larger rotational energy and large translational energy. As J″CO decreases, a bimodal distribution arises with one broad component and the other sharp component carrying the average energy of only 1-2 kcal mol-1. The branching ratio of the sharp component increases with a decrease of J″CO; (7.3 ± 0.6)% is reached as the image is probed at J″CO = 10. The production of a sharp component is ascribed to a roaming mechanism that has the following features: a small total translational energy, a low rotational energy partitioning in CO, but a large internal energy in the CH3OH co-product. The internal energy deposition in the fragments shows distinct difference from those via the conventional transition state. © the Owner Societies 2011.

Single-molecule fluorescence correlation spectroscopy overcomes the resolution barrier of optical microscopy (10≈–20 nm) and is utilized to look into lipid dynamics in small unilamellar vesicles (SUVs; diameter < 100 nm). The fluorescence trajectories of lipid-like tracer 1,1′-dioctadecyl-3,3,3′,3′-tetramethylindodicarbocyanine (DiD) in the membrane bilayers are acquired at a single-molecule level. The autocorrelation analysis yields the kinetic information on lipid organization, oxygen transport, and lateral diffusion in SUVs' membrane. First, the isomerization feasibility may be restricted by the addition of cholesterols, which form structure conjugation with DiD chromophore. Second, the oxygen transport is prevented from the ultrasmall cluster and cholesterol-rich regions, whereas it can pass through the membrane region with liquid-disordered phase (Ld) and defects. Third, by analyzing 2D spectra correlating the lipid diffusion coefficient and triplet-state lifetime, the heterogeneity in lipid bilayer can be precisely visualized such as lipid domain with different phases, the defects of lipid packing, and DiD-induced “bouquet” ultrasmall clusters. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

A molecular beam of halothane (2-bromo-2-chloro-1,1,1-trifluoroethane) is focused by a hexapolar electrostatic field and photolyzed by UV laser radiation at 234 nm. Angular and speed distributions of chlorine and bromine photofragments emitted from halothane are measured for both spin-orbit states independently. Although the dissociation energy of the C-Cl bond is larger than that of C-Br, the relative yield of Cl to Br was found to be approximately 2. Measured speed and angular distributions of atomic fragments show distinct kinetic energy release and scattering characteristics: for bromine, observed fast and aligned fragments exhibit a signature of a direct mode of dissociation for the C-Br bond, via the electronically excited potential energy surface denoted nσ*(C-Br), of repulsive nature; for chlorine, a variation in the features is observed for the dissociation pathway through nσ*(C-Cl), from a modality similar to the bromine case, leading to fragments with appreciable kinetic energy release and pronounced directionality, to a modality involving slow products, nearly isotopically distributed. The origin of this behavior can be attributed to nonadiabatic interaction operating between the nσ*(C-Br) and nσ*(C-Cl) surfaces. These results are not only relevant for a detailed understanding of adiabatic versus diabatic coupling mechanisms in the manifold of excited states populated by photon absorption, but they also point out the possibility of selectively inducing specific dissociation pathways, even when involving energetically unfavorable outcomes, such as, in this case, the prevailing rupture of the stronger C-Cl bond against that of the weaker C-Br bond. Copyright © 2020 American Chemical Society.

Kinetics of photoinduced electron transfer (ET) from oxazine 1 dye to TiO2 nanoparticles (NPs) surface is studied at a single molecule level by using confocal fluorescence microscopy. Upon irradiation with a pulsed laser at 630 nm, the fluorescence lifetimes sampled among 100 different dye molecules are determined to yield an average lifetime of 2.9 ± 0.3 ns, which is close to the value of 3.0 ± 0.6 ns measured on the bare coverslip. The lifetime proximity suggests that most interfacial electron transfer (IFET) processes for the current system are inefficient, probably caused by physisorption between dye and the TiO2 film. However, there might exist some molecules which are quenched before fluorescing and fail to be detected. With the aid of autocorrelation analysis under a three-level energy system, the IFET kinetics of single dye molecules in the conduction band of TiO2 NPs is evaluated to be (1.0 ± 0.1)×104 s-1 averaged over 100 single molecules and the back ET rate constant is 4.7 ± 0.9 s-1. When a thicker TiO2 film is substituted, the resultant kinetic data do not make a significant difference. The trend of IFET efficacy agrees with the method of fluorescence lifetime measurements. The obtained forward ET rate constants are about ten times smaller than the photovoltage response measured in an assembled dye-sensitized solar cell. The discrepancy is discussed. The inhomogeneous and fluctuation characters for the IFET process are attributed to microenvironment variation for each single molecule. The obtained ET rates are much slower than the fluorescence relaxation. Such a small ET quantum yield is yet feasibly detectable at a single molecule level. © 2010 American Chemical Society.

Following single-photon dissociation of CH2I2 at 248 nm, I2 molecular elimination is detected by using cavity ring-down absorption spectroscopy. The technique comprises two laser beams propagating in a perpendicular configuration, in which a tunable laser beam along the axis of the ring-down cell probes the I2 fragment in the B 3 ou + - X 1 g + transition. The nascent vibrational populations for v 0, 1, and 2 levels are obtained with a population ratio of 1:(0.65 0.10):(0.30 0.05), corresponding to a Boltzmann-like vibrational temperature of 544 73 K. The quantum yield of the ground state I2 elimination reaction is determined to be 0.0040 0.0025. With the aid of ab initio potential energy calculations, the pathway of molecular elimination is proposed on the energetic ground state CH2I2 via internal conversion, followed by asynchronous three-center dissociation. A positive temperature effect supports the proposed mechanism. © 2011 American Institute of Physics.

Evanescent-wave cavity ring-down spectroscopy is applied to investigate the adsorption behavior of rhodamine B at three different interfaces. The adsorption equilibrium constant (Kads) and adsorption free energy of rhodamine B at the silica/methanol interface are determined to be (1.5 ± 0.2) × 104 M-1 and -23.8 ± 0.4 kJ/mol by use of a Langmuir isotherm model. A Langmuir-based kinetic model is also developed to determine the corresponding adsorption and desorption rate constants of (1.02 ± 0.03) × 102 M-1 s-1 and (7.1 ± 0.2) × 10-3 s-1, from which Kads is obtained to be (1.45 ± 0.09) × 104 M-1, in agreement with the value determined under equilibrium conditions. Similarly, when rhodamine B is at the chlorotrimethylsilane-immobilized silica/methanol interface, the adsorption and desorption rate constants are determined to be (1.7 ± 0.2) × 102 M-1 s-1 and (5.0 ± 1.0) × 10-3 s-1· The subsequent Kads is (3.6 ± 0.4) × 104 M-1, which is larger than that at the silica/methanol interface. The former adsorption is dominated by hydrophobic interaction, while the latter is subject to electrostatic attraction. When rhodamine B is at the silica/water interface, there exist three chemical forms, including zwitterion (R+B -), cation (RBH+), and lactone (RBL). A combination of double-layer and Langmuir competitive models is used to fit the adsorption isotherm as a function of solution pH, yielding Kads of (2.5 ± 0.2) × 104 M-1 and (1.1 ± 0.2) × 105 M-1 for R+B- and RBH +, respectively. RBL is considered to have the same Kads value as R+B-. © 2010 American Chemical Society.

A primary elimination channel of the chlorine molecule in the one-photon dissociation of SOCl2 at 248 nm was investigated using cavity ring-down absorption spectroscopy (CRDS). By means of spectral simulation, the ratio of the vibrational population in the v = 0, 1, and 2 levels was evaluated to be 1:(0.10 ± 0.02):(0.009 ± 0.005), corresponding to a Boltzmann vibrational temperature of 340 ± 30 K. The Cl2 molecular channel was obtained with a quantum yield of 0.4 ± 0.2 from the X1A′ ground state of SOCl2via internal conversion. The dissociation mechanism differs from a prior study where a smaller yield of <3% was obtained, initiated from the 21A′ excited state. Temperature-dependence measurements of the Cl2 fragment turn out to support our mechanism. With the aid of ab initio potential energy calculations, two dissociation routes to the molecular products were found, including one synchronous dissociation pathway via a three-center transition state (TS) and the other sequential dissociation pathway via a roaming-mediated isomerization TS. The latter mechanism with a lower energy barrier dominates the dissociation reaction. This journal is © the Owner Societies.

Abstract The nanohybrids of noble metal (M=Ag, Au, Pd, Pt, and Ru) nanoparticle-decorated rhenium disulfide nanosheets (ReS2 NSs) were demonstrated as excellent catalysts towards the reduction of aromatic nitro compounds. The M/ReS2 nanohybrids were synthesized by facile hydrothermal method and characterization results proved that each metal nanoparticle was anchored on the ReS2 NSs. These nanohybrids exhibited superior catalytic performance towards the reduction of aromatic nitro compounds including 4-nitrophenol, 2-nitroaniline, and nitrobenzene. Interestingly, the Ru/ReS2 and Pd/ReS2 showed enhanced catalytic reduction compared to Ag/ReS2, Au/ReS2, and Pt/ReS2 and also showed significant catalytic stability due to metal nanoparticles anchored strongly on the surface of ReS2 NSs. Moreover, these M/ReS2 nanohybrids turned out to have much better catalytic performance compared to noble metal nanoparticle-based catalysts. A plausible reduction mechanism was proposed for each nitro compound. It was verified that the metal-nanoparticle-mediated hydrogen transfer was involved in the reduction of nitro compounds to amines. This report demonstrates the catalytic activities for metal nanoparticle-decorated ReS2 nanohybrids, which can serve as a paradigm to open up a future trend in the design of transition metal dichalcogenides nanohybrids as superior catalysts.

Palladium nanoparticles encapsulated in the carbon dots (Pd/C-dots) are demonstrated to play a role of multifunctional nanohybrid in the synergetic applications of sensor and catalysis. The photochemical method is applied to synthesize Pd/C-dots in which Pd nanoparticles (NPs) are dispersedly encapsulated by C-dots layer. The nanohybrid can function as a fluorescent sensor and reductive catalyst, due to the inherent properties of C-dots and Pd NPs, respectively. The Pd/C-dots exhibit a highly selective and sensitive detection toward the nickel (Ni2+) ion with a detection limit of 7.26 × 10−9 m. Moreover, the Ni2+ is detected in MCF-7 live cells signifying the applicability of nanohybrid as a promising sensor. On the other hand, the Pd/C-dots show an excellent catalytic performance in the reduction of 4-nitrophenol and eosin yellow. A plausible mechanism for sensing and catalysis behavior is proposed. The sensor system is designed on the basis of the fluorescence turn-on when Ni2+ interacts with functional groups of the C-dots layer. The activities of catalytic reduction are mainly governed by the Pd NPs and further enhanced when the C-dots layer is incorporated. The Pd/C-dots can serve as a new paradigm for opening a potential trend in the design of multifunctional materials to diverse applications. © 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

The fluorogenic aptamer sensing of interferon-gamma (IFN-γ) was scrutinized using two-dimensional (2D) ReS2 and TiS2 nanosheets (NSs) as a platform. The IFN-γ an important cytokine, functions as a bio-indicator to detect infectious diseases such as tuberculosis and human immunodeficiency virus. This 2D NSs based aptamer sensor was implemented to induce the fluorescence off/on resulting from an aptamer, in the absence or presence of a target to be probed. The fluorescence emitting from the aptamer is quenched by interacting with NSs, while the ensuing fluorescence is recovered upon addition of target. Such a fluorescence off/on mechanism was proposed based on the behavior of fluorescence resonance energy transfer (FRET) between the aptamer and NSs. The fluorescence response exhibits linearity as a function of target, and the detection limit of IFN-γ was evaluated to be 57.6 and 82.7 pM for ReS2 and TiS2 NSs, respectively, being comparable to or even better than those methods adopted for probing IFN-γ. The selectivity property was also characterized with various targets, exhibiting a very specific selectivity for IFN-γ. The findings reveal that the aptamer-transition metal dichalcogenides (TMD) NSs will be a great sensing pair to the development of aptamer-based biosensors. Moreover, the biocompatibility and sensing capability of IFN-γ was implemented in human embryonic kidney 293T (HEK) live cells. This is the first report to emerging fluorogenic sensing of IFN-γ aptamer with 2D TMD, showing a promising trend for future design of biosensors. © 2017 Elsevier B.V.

Steady-state and time-resolved fluorescence spectroscopy techniques were used to probe multifluorescence resulting from citric-acid-derived carbon dots (C-dots). Commonly, both carboxyl-/amine-functionalized C-dots exhibit three distinct emissive states corresponding to the carbon-core and surface domain. The shorter-wavelength fluorescence (below 400 nm) originates from the carbon-core absorption band at ∼290 nm, whereas the fluorescence (above 400 nm) is caused by two surface states at ∼350 and 385 nm. In addition to three emissive states, a molecular state was also found in amine-functionalized C-dots. Time-resolved emission spectra (TRES) and time-resolved area normalized emission spectra (TRANES) were analyzed to confirm the origin of excitation wavelength-dependent fluorescence of C-dots. The surface functional groups on the C-dots are capable of regulating the electron transfer to affect the multifluorescence behavior. The electron transfer takes place from the carbon-core to surface domain by the presence of -COOH on the surface and vice versa for the case of -NH2 present on the surface. To the best of our knowledge, this is the first report that the multiemissive states are probed in C-dots systems using TRES and TRANES analyses, and related fluorescence mechanisms are verified clearly. © 2015 American Chemical Society.

Herein, we report ultra-sensitive sensing of a prostate-specific antigen (PSA), which is used as a biomarker to detect prostate cancer, using a molybdenum series (MoO3, MoS2, and MoSe2) of two-dimensional nanosheets (2D NSs). Moreover, the design of a 2D NS-based PSA aptamer sensor system was demonstrated based on a fluorescence turn-on mechanism in the presence of a target. The 2D NSs acted as an excellent sensing platform in which the PSA aptamer was adsorbed on the NSs and subsequent energy transfer between them led to fluorescence quenching of the aptamer. The detection limit of PSA was achieved to be 13 pM for MoO3 NSs, whereas the MoS2 and MoSe2 systems exhibited a detection limit of 72 and 157 pM, respectively. To the best of our knowledge, this is the first report on the ultra-sensitive detection of a 2D NS-based aptamer sensor. The in vitro bioimaging measurements were performed using confocal fluorescence microscopy. Herein, PSA detection was successfully demonstrated in human embryonic kidney 293T (HEK) live cells. Moreover, the MoO3, MoS2, and MoSe2 NSs exhibit excellent biocompatibility and low toxicity; thus, these 2D NSs can be used as a promising sensor platform to detect prostate cancer. This journal is © The Royal Society of Chemistry.

Investigations were carried out on the carbon-dots (C-dots) based fluorescent off - on (Fe 3 €‰+ €‰ - S 2 O 3 2 ') and on - off (Zn 2 €‰+ €‰ - PO 4 3 ') sensors for the detection of metal ions and anions. The sensor system exhibits excellent selectivity and sensitivity towards the detection of biologically important Fe 3 €‰+ €‰, Zn 2 €‰+ €‰ metal ions and S 2 O 3 2 ', PO 4 3 ' anions. It was found that the functional group on the C-dots surface plays crucial role in metal ions and anions detection. Inspired by the sensing results, we demonstrate C-dots based molecular logic gates operation using metal ions and anions as the chemical input. Herein, YES, NOT, OR, XOR and IMPLICATION (IMP) logic gates were constructed based on the selection of metal ions and anions as inputs. This carbon-dots sensor can be utilized as various logic gates at the molecular level and it will show better applicability for the next generation of molecular logic gates. Their promising properties of C-dots may open up a new paradigm for establishing the chemical logic gates via fluorescent chemosensors.

Ruthenium nanoparticle (NP)-decorated carbon dots (Ru/C-dots) were fabricated as a potential catalyst in the application of both oxidation and reduction. The photochemical method was used to synthesize Ru/C-dot nanohybrids. The as-prepared Ru/C-dots exhibited a core-shell-based nanochain structure, in which the spherical nature of C-dots further evolved to a layer structure to homogeneously encapsulate Ru NPs. Such Ru/C-dots have excellent catalytic properties, which were demonstrated in the oxidation of flavonoids and concomitantly reduction of inorganic complex and organic dyes, each yielding a high catalytic rate constant. We also proposed an appropriate catalytic mechanism for each reaction. Higher catalytic activity was achieved by the synergistic effect of the encapsulated Ru NPs and the C-dots layer. Further, this nanohybrid was successfully applied to inspect a real aqueous sample. We anticipated that Ru/C-dots nanohybrid may open up a broad platform for the design of efficient multifunctional catalysts. Copyright © 2020 American Chemical Society.

Since the past decade, enormous research efforts have been devoted to the detection/degradation and quantification of environmental toxic pollutants and biologically important molecules due to their ubiquitous necessity in the fields of environmental protection and human health. These fields of sensor and catalysis are advanced to a new era after emerging of nanomaterials, especially, carbon nanomaterials including graphene, carbon nanotube, carbon dots (C-dots), etc. Among them, the C-dots in the carbon family are rapidly boosted in the aspect of synthesis and application due to their superior properties of chemical and photostability, highly fluorescent with tunable, non/low-toxicity, and biocompatibility. The C-dot-based functional materials have shown great potential in sensor and catalysis fields for the detection/degradation of environmental pollutants. The major advantage of C-dots is that they can be easily prepared from numerous biomass/waste materials which are inexpensive and environment-friendly and are suitable for a developing trend of sustainable materials. This review is devoted to the recent development (since 2017) in the synthesis of biomass- and chemical-derived C-dots as well as diverse functionalization of C-dots. Their capability as a sensor and catalyst and respective mechanism are summarized. The future perspectives of C-dots are also discussed.

Multiple sensor systems are designed by varying aza-crown ether moiety in silicon quantum dots (SiQDs) for detecting individual Mg2+, Ca2+, and Mn2+ metal ions with significant selectivity and sensitivity. The detection limit of Mg2+, Ca2+, and Mn2+ can reach 1.81, 3.15, and 0.47 μM, respectively. Upon excitation of the SiQDs which are coordinated with aza-crown ethers, the photoinduced electron transfer (PET) takes place from aza-crown ether moiety to the valence band of SiQDs core such that the reduced probability of electron-hole recombination may diminish the subsequent fluorescence. The fluorescence suppression caused by such PET effect will be relieved after selective metal ion is added. The charge-electron binding force between the metal ion and aza-crown ether hinders the PET and thereby restores the fluorescence of SiQDs. The design of sensor system is based on the fluorescence "turn-on" of SiQDs while in search of the appropriate metal ion. For practical application, the sensing capabilities of metal ions in the live cells are performed and the confocal image results reveal their promising applicability as an effective and nontoxic metal ion sensor. © 2016 American Chemical Society.

The primary elimination channel of bromine molecule in one-photon dissociation of CH2BrC(O)Br at 248 nm is investigated using cavity ring-down absorption spectroscopy. By means of spectral simulation, the ratio of nascent vibrational population in v 0, 1, and 2 levels is evaluated to be 1:(0.5 ± 0.1):(0.2 ± 0.1), corresponding to a Boltzmann vibrational temperature of 581 ± 45 K. The quantum yield of the ground state Br2 elimination reaction is determined to be 0.24 ± 0.08. With the aid of ab initio potential energy calculations, the obtained Br2 fragments are anticipated to dissociate on the electronic ground state, yielding vibrationally hot Br2 products. The temperature-dependence measurements support the proposed pathway via internal conversion. For comparison, the Br2 yields are obtained analogously from CH3CHBrC(O)Br and (CH3)2CBrC(O)Br to be 0.03 and 0.06, respectively. The trend of Br2 yields among the three compounds is consistent with the branching ratio evaluation by Rice-Ramsperger-Kassel-Marcus method. However, the latter result for each molecule is smaller by an order of magnitude than the yield findings. A non-statistical pathway so-called roaming process might be an alternative to the Br2 production, and its contribution might account for the underestimate of the branching ratio calculations. © 2012 American Institute of Physics.

Ab initio potential energy surfaces and the corresponding analytical energy functions of the ground 1A′ and excited 2A′ states for the Li(22P) plus H2 reaction are constructed. Quasiclassical trajectory calculations on the fitted energy functions are performed to characterize the reactions of Li(22P) with H2(v 0, j 1) and H2(v 1, j 1) as well as the reaction when the vibrational energy is replaced by collision energy. For simplicity, the transition probability is assumed to be unity when the trajectories go through the crossing seam region and change to the lower surface. The calculated rotational distributions of LiH(v 0) for both H2(v 0, j 1) and H2(v 1, j 1) reactions are single-peaked with the maximum population at j′ 7, consistent with the previous observation. The vibrational excitation of H2(v 1) may enhance the reaction cross section of LiH(v′ 0) by about 200 times, as compared to a result of 93-107 reported in the experimental measurements. In contrast, the enhancement is 3.1, if the same amount of energy is deposited in the translational states. This endothermic reaction can be considered as an analog of late barrier. According to the trajectory analysis, the vibrational excitation enlarges the H-H distance in the entrance channel to facilitate the reaction, but the excess energy may not open up additional reaction configuration. © 2011 American Institute of Physics.

Competitive bond dissociation mechanisms for bromoacetyl chloride and 2- and 3-bromopropionyl chloride following the 1[n(O) →π*(Cï£O)] transition at 234-235 nm are investigated. Branching ratios for C-Br/C-Cl bond fission are found by using the (2+1) resonance-enhanced multiphoton ionization (REMPI) technique coupled with velocity ion imaging. The fragment branching ratios depend mainly on the dissociation pathways and the distances between the orbitals of Br and the Cï£O chromophore. C-Cl bond fission is anticipated to follow an adiabatic potential surface for a strong diabatic coupling between the n(O)π*(Cï£O) and np(Cl)σ*(C-Cl) bands. In contrast, C-Br bond fission is subject to much weaker coupling between n(O)π*(Cï£O) and np(Br)σ*(C-Br). Thus, a diabatic pathway is preferred for bromoacetyl chloride and 2-bromopropionyl chloride, which leads to excited-state products. For 3-bromopropionyl chloride, the available energy is not high enough to reach the excited-state products such that C-Br bond fission must proceed through an adiabatic pathway with severe suppression by nonadiabatic coupling. The fragment translational energies and anisotropy parameters for the three molecules are also analyzed and appropriately interpreted. Busted open: Insight into the mechanisms causing C-Cl and C-Br bond fission of bromoacetyl chloride and 2- and 3-bromopropionyl chloride by following the 1[n(O) →π*(Cï£O)] transition is obtained. The figure shows the center-of-mass translational energy distributions of ground-state Br formation through a diabatic pathway for the dissociation of 2-bromopropionyl chloride. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Upon one-photon excitation at 248 nm, gaseous CH3C(O)SH is dissociated following three pathways with the products of (1) OCS + CH 4, (2) CH3SH + CO, and (3) CH2CO + H 2S that are detected using time-resolved Fourier-transform infrared emission spectroscopy. The excited state 1(nO, π *CO) has a radiative lifetime of 249 ± 11 ns long enough to allow for Ar collisions that induce internal conversion and enhance the fragment yields. The rate constant of collision-induced internal conversion is estimated to be 1.1 × 10-10 cm3 molecule -1 s-1. Among the primary dissociation products, a fraction of the CH2CO moiety may undergo further decomposition to CH2 + CO, of which CH2 is confirmed by reaction with O2 producing CO2, CO, OH, and H2CO. Such a secondary decomposition was not observed previously in the Ar matrix-isolated experiments. The high-resolution spectra of CO are analyzed to determine the ro-vibrational energy deposition of 8.7 ± 0.7 kcal/mol, while the remaining primary products with smaller rotational constants are recognized but cannot be spectrally resolved. The CO fragment detected is mainly ascribed to the primary production. A prior distribution method is applied to predict the vibrational distribution of CO that is consistent with the experimental findings. © 2013 American Institute of Physics.

Cavity ring-down absorption spectroscopy (CRDS) is employed to investigate one-photon dissociation of (COCl)2 at 248 nm obtaining a primary Cl2 elimination channel. A ratio of vibrational population is estimated to be 1:(0.12 ± 0.03):(0.011 ± 0.003) for the v = 0, 1, and 2 levels. The quantum yield of Cl2 molecular channel is obtained to be 0.8 ± 0.4 initiated from the X̃ 1Ag ground state surface (COCl)2 via internal conversion. The obtained total quantum yield is attributed to both primary ((COCl)2 + hν → 2CO + Cl2) and secondary reactions (dominated by Cl + COCl → Cl2 + CO). The former is estimated to share a yield of >0.14, while the latter contributes up to 0.66. The photodissociation pathway to the molecular products is calculated to proceed via a four-center transition state (TS) from which Cl2 is eliminated synchronously. Installation of the mirrors with reflectivity of 99.995% in the CRDS apparatus prolongs the ring-down time to 70 μs, thus allowing for the contribution from 17% up to 66% of the total Cl2 yield from secondary reaction depending on the reaction temperature. Despite uncertainty in determining the product yield, the primary Cl2 dissociation channel eliminated from (COCl)2 is observed for the first time. © 2017 American Chemical Society.

Polynorbornenes appended with anthracene and chiral alanine linkers are synthesized. Hydrogen bonding between the adjacent bisamidic linkers brings adjacent anthracene chromophores in a more suitable orientation for exciton coupling and renders one-handed helical structures for these polymers. Excimer formation is observed from their emission spectra. Monoamidic linkers provide only one hydrogen bond, which would be less robust and result in much lower circular dichroic response. Hydrogen bonding between the adjacent chiral alanine linkers brings appended anthracene in a more suitable orientation for exciton coupling and excimer formation, rendering one-handed helical structures in polynorbornenes. © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.