Photolysis Dynamics Laser Chemistry Lab

Atomic halogen elimination from halogen-related compounds plays a vital role in the depletion of the ozone layer and is well investigated. However, the probabilities for elimination of molecular halogens and hydrogen halides are rarely scrutinised. We develop distinct method for the investigation of each kind of fragment. Velocity-mapping ion-imaging was employed to study the atomic halogen elimination from alkyl halides and aryl halides, focusing on the fractions of the translational energy release, the quantum yields of the atomic fragments, transition probability for curve crossing, competitive halogen-related bond fission, and anisotropy parameters to understand their dynamical complexity. Cavity ring-down absorption spectroscopy was implemented to investigate the molecular halogen fragments dissociated from the aliphatic halides and acyl halides for their optical spectra, vibrational branches, quantum yields, and the dissociation mechanisms. Time-resolved Fourier transform infrared emission spectroscopy was employed to confine the primary products of hydrogen halide elimination from acyl halides in the presence of Ar gas. It is, for the first time, to overview these existing small halogen-related fragments eliminated from halogen-containing compounds. The detailed characterisation of these fragments should unveil complicated halogen-related dissociation mechanisms which may supplement the current knowledge and help with the photochemical assessment of halogen-related environmental issue. © 2020 Informa UK Limited, trading as Taylor & Francis Group.

The inhibition of platelet activation is considered a potential therapeutic strategy for the treatment of arterial thrombotic diseases; therefore, maintaining platelets in their inactive state has garnered much attention. In recent years, nanoparticles have emerged as important players in modern medicine, but potential interactions between them and platelets remain to be extensively investigated. Herein, we synthesized a new type of carbon dot (CDOT) nanoparticle and investigated its potential as a new antiplatelet agent. This nanoparticle exerted a potent inhibitory effect in collagen-stimulated human platelet aggregation. Further, it did not induce cytotoxic effects, as evidenced in a lactate dehydrogenase assay, and inhibited collagen-activated protein kinase C (PKC) activation and Akt (protein kinase B), c-Jun N-terminal kinase (JNK), and p38 mitogen-activated protein kinase (MAPK) phosphorylation. The bleeding time, a major side-effect of using antiplatelet agents, was unaffected in CDOT-treated mice. Moreover, our CDOT could reduce mortality in mice with ADP-induced acute pulmonary thromboembolism. Overall, CDOT is effective against platelet activation in vitro via reduction of the phospholipase C/PKC cascade, consequently suppressing the activation of MAPK. Accordingly, this study affords the validation that CDOT has the potential to serve as a therapeutic agent for the treatment of arterial thromboembolic disorders. © 2020 by the authors.

Density functional theory (DFT) as one of molecular simulation techniques has been widely used to become rapidly a powerful tool for research and technology development for the past three decades. In particular, the DFT-based theoretical and fundamental knowledge have shed light on our understanding of the fundamental surface science, catalysis, sensors, materials science, and biology. Oxygen, nitrogen, boron, phosphorus, and sulfur are the most common heteroatoms introduced on the functional carbon nanomaterials surface with different surface functionalities. This book chapter aims to provide a pedagogical narrative of the DFT and relevant computational methods applied for surface chemistry, homogeneous/heterogeneous catalysis, and the fluorescence-based sensing properties of carbon nanomaterials. We overview several representative case studies associated with energy and chemicals production and discuss relevant principles of computationally driven carbon nanomaterials design.

This study discusses the prospect of using biomass waste material, such as Cassia fistula (golden shower) fruit, as a carbon precursor in the development of new carbon material for the sustainable electrochemical sensor application. We successfully synthesized platinum-rhenium nanoparticles decorated on a porous activated carbon (Pt-Re NP/PAC) nanocomposite through the incorporation of metal precursors such as platinum(II) acetylacetonate (Pt(acac)2) and dirhenium decacarbonyl (Re2(CO)10) via a facile thermal reduction process. A variety of physicochemical and electrochemical methods were employed to characterize the morphology, structural, and electrochemical properties of the Pt-Re NP/PAC material. We then looked into the analytical behavior and applications of GCE modified with Pt-Re NP/PAC (Pt-Re NP/PAC/GCE) for the determination of furazolidone (chemotherapy drug) by employing different voltammetric techniques. The influence of experimental conditions such as scan rate, pH, accumulation time, amount of the modifier, and sample concentration on the peak current of the furazolidone was studied. The proposed drug sensor exhibited a wide linear range (WLR) for furazolidone in 0.05 M phosphate-buffered saline (PBS, pH 7.0) from 1.0 to 299 μM with a limit of detection (LOD) of 75.5 nM and appreciable sensitivity (5.52 μA μM-1 cm-2) which were calculated from linear sweep voltammetry (LSV). In addition, these analytical parameters including WLR, sensitivity, and LOD were estimated to be 0.2-117.7 μM, 19.20 μA μM-1 cm-2, and 20.8 nM and were obtained using differential pulse voltammetry (DPV). Therefore, the prepared Pt-Re NP/PAC modified sensor could be a potential candidate for the determination of furazolidone in pharmaceutical formulation, human urine, and blood serum samples, and the results are appreciable. Copyright © 2020 American Chemical Society.

A clear and positive correlation between the CO2 concentration and the blood-sugar level has been observed via a noninvasive and time-dependent monitoring of CO2 concentration from human breath, which is carried out by using a homemade gas chromatography (GC)/milli-whistle compact analyzer. The time-dependent sampling of the CO2 concentration correlated between 5.0 to 5.6% (1% = 104 ppm) in accordance with blood-sugar level variations of 80 to 110 mg/dL. The analytical method results in a rapid, continuous and non-invasive determination of blood-sugar level via measurement of the CO2 concentration exhaled from the lungs.

Palladium plays a pivotal role in most of the industrial heterogeneous catalysts, because of its unique properties such as well-defined structure, great intrinsic carrier, outstanding electronic, mechanical and thermal stability. The combination of palladium and various porous carbons (PCs) can widen the use of heterogeneous catalysts. This review highlights the advantages and limitations of carbon supported palladium-based heterogeneous catalyst in reduction of toxic hexavalent chromium (Cr(VI)). In addition, we address recent progress on synthesis routes for mono and bimetallic palladium nanoparticles supported by various carbon composites including graphene-based materials, carbon nanotubes, mesoporous carbons, and activated carbons. The related reaction mechanisms for the Cr(VI) reduction are also suggested. Finally, the challenge and perspective are proposed. © 2020

Porous carbon nanosheets were prepared by the carbonization of paper flower via chemical and physical activation. The structural properties of the as-prepared carbons were characterized using the techniques, such as X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Raman spectroscopy, N2 sorption isotherms and X-ray photoelectron spectroscopy (XPS), while the related morphological analyses were conducted using scanning/transmission electron microscopy (SEM/TEM). The obtained carbons exhibit a high specific surface area up to 1801 m2 g−1 with a robust porous graphitic carbon layer structure, which provides the merits for potential application in energy storage and dye removal. We carried out potentiostatic and galvanostatic measurements using a three-electrode cell in 1.0 M H2SO4 aqueous electrolyte and achieved a specific capacitance of 118, 109.5, 101.7, 93.6, and 91.2 F g−1 at 1, 2, 4, 8 and 12 A g−1, respectively. The stability at 12 A g−1 was tested to reach 10,000 cycles with capacity retention of around 97.4%. We have demonstrated that the paper flower-derived carbons at activation temperature 800 °C (PFC-800) can be used as a promising electrode material in supercapacitor. PFC-800 can also serve as an efficient sunset yellow dye removal, showing the maximum adsorption capacity for sunset yellow (Q0, 273.6 mg g−1). © 2018 King Saud University

Ruthenium nanoparticle (NP)-decorated carbon dots (Ru/C-dots) were fabricated as a potential catalyst in the application of both oxidation and reduction. The photochemical method was used to synthesize Ru/C-dot nanohybrids. The as-prepared Ru/C-dots exhibited a core-shell-based nanochain structure, in which the spherical nature of C-dots further evolved to a layer structure to homogeneously encapsulate Ru NPs. Such Ru/C-dots have excellent catalytic properties, which were demonstrated in the oxidation of flavonoids and concomitantly reduction of inorganic complex and organic dyes, each yielding a high catalytic rate constant. We also proposed an appropriate catalytic mechanism for each reaction. Higher catalytic activity was achieved by the synergistic effect of the encapsulated Ru NPs and the C-dots layer. Further, this nanohybrid was successfully applied to inspect a real aqueous sample. We anticipated that Ru/C-dots nanohybrid may open up a broad platform for the design of efficient multifunctional catalysts. Copyright © 2020 American Chemical Society.

Since the past decade, enormous research efforts have been devoted to the detection/degradation and quantification of environmental toxic pollutants and biologically important molecules due to their ubiquitous necessity in the fields of environmental protection and human health. These fields of sensor and catalysis are advanced to a new era after emerging of nanomaterials, especially, carbon nanomaterials including graphene, carbon nanotube, carbon dots (C-dots), etc. Among them, the C-dots in the carbon family are rapidly boosted in the aspect of synthesis and application due to their superior properties of chemical and photostability, highly fluorescent with tunable, non/low-toxicity, and biocompatibility. The C-dot-based functional materials have shown great potential in sensor and catalysis fields for the detection/degradation of environmental pollutants. The major advantage of C-dots is that they can be easily prepared from numerous biomass/waste materials which are inexpensive and environment-friendly and are suitable for a developing trend of sustainable materials. This review is devoted to the recent development (since 2017) in the synthesis of biomass- and chemical-derived C-dots as well as diverse functionalization of C-dots. Their capability as a sensor and catalyst and respective mechanism are summarized. The future perspectives of C-dots are also discussed.

Recently, transition metal/metal oxides (TMMOs) decorated on porous carbons (PCs) have been intensively focused on designing rational electrode materials for the promising future specific category of electrochemical energy storage and conversion technologies. In particular, TMMO incorporation with PC structures has become very attractive in the area of supercapacitors (SCs) mainly caused by their large accessible surface areas (SSA), together with the suitable pore size distributions (PSD), high electrical conductivity, and rapid redox reactions reversibly on the surface. The transportation of ions, as well as electrons in the bulk of electrodes, is fast as a result of optimal contact between electrodes and electrolytes at the electrode-electrolyte interface, thereby generating high specific capacities (Csp) of these PCs with TMMOs. We report a survey regarding recent advances in the fabrication and synthesis of TMMOs decorated on PCs with some physical characteristics and their applications for electrochemical capacitors. Some future trends and prospects for further development of the subject nanocomposites in application to next-generation supercapacitors are discussed. © 2020 American Chemical Society.

In photodissociation of trans-formic acid (HCOOH) at 193 nm, we have observed two molecular channels of CO + H2O and CO2 + H2 by using 1 μs-resolved Fourier-transform infrared emission spectroscopy. With the aid of spectral simulation, the CO spectra are rotationally resolved for each vibrational state (v = 1–8). Each of the resulting vibrational and rotational population distributions is characteristic of two Boltzmann profiles with different temperatures, originating from either transition state pathway or OH-roaming to form the same CO + H2O products. The H2O roaming co-product is also spectrally simulated to understand the interplay with the CO product in the internal energy partitioning. Accordingly, this work has evaluated the internal energy disposal for the CO and H2O roaming products; especially the vibrational-state dependence of the roaming signature is reported for the first time. Further, given a 1 μs resolution, the temporal dependence of the CO/CO2 product ratio at v ≥ 1 rises from 3 to 10 of study, thereby characterizing the effect of conformational memory and well reconciling with the disputed results reported previously between absorption and emission methods. © 2020, The Author(s).

The simple and novel surfactant-free synthesis of flower-like strontium-doped nickel oxide nanorods (SNO NRs) via a simple sonochemical co-precipitation method was used for electrochemical sensing of quercetin (QCT). The structure and morphology of the as-synthesized flower-like SNO NRs were characterized using various spectroscopic techniques. Then, CV, EIS, and DPV were used to examine their electrochemical properties. The effective loading concentration, pH, scan rate and stability of the SNO NR-modified electrodes were studied. Under optimized conditions, the electrochemical detection of QCT demonstrated a low detection potential of 0.3 V (vs. Ag/AgCl), and achieved a higher oxidation peak current compared to those of other modified electrodes in PB (pH 5.0). The voltammetric current response was found to linearly increase with an increasing concentration range from 0.01-68.53 μM, along with a low detection limit of 1.98 nM, and a high sensitivity of 2.1055 μA mM cm-2. The sensor also shows good selectivity and satisfactory recovery for real sample (apple and grape juice) analysis. © 2020 The Royal Society of Chemistry and the Centre National de la Recherche Scientifique.

The two-step microwave method was used to synthesize zinc oxide nanostars linked to graphene oxide (GO) nanosheets. The material was used to modify a screen printed carbon electrode (SPCE) and then explored as a binder-free electrocatalyst for the electrochemical determination of methyl parathion (MP). The morphology and crystallinity of the material were characterized by various techniques. The modified SPCE shows extraordinary electrochemical performances for sensitive determination of MP. Figures of merit include (a) a wide linear dynamic range (0.03–670 μM), (b) a low detection limit (1.2 nM; at S/N = 3), (c) a comparably low working voltage (−0.69 V vs. Ag/AgCl); and (d) an excellent sensitivity (16.5 μA μM−1 cm−2) that surpasses other modified electrodes. The sensor was successfully applied to the determination of MP, even in the presence of other common electroactive interference, in (spiked) fruits and vegetables. [Figure not available: see fulltext.]. © 2019, Springer-Verlag GmbH Austria, part of Springer Nature.

This present study describes the synthesis of ultrafine Bi-Sn nanoparticles decorated on carbon aerogels (Bi-Sn NP/CAG) as a nanocomposite for the electrochemical simultaneous determination of dopamine (DA) and clozapine (CLZ). The typical characterization techniques, such as XRD, Raman, BET, FT-IR, TGA, XPS, and FE-SEM/TEM, showed useful insights into the crystal phase and morphology of Bi-Sn NP/CAG. Integrated Bi-Sn NP/CAG built into a cost-effective screen printed carbon electrode (SPCE) offers a high electrochemical surface area (ECSA) compared to unmodified, Bi-Sn, and CAG/SPCEs, such that it favourably allowed the binding of DA and CLZ molecules onto the surface at the Bi-Sn/CAG, which was demonstrated by cyclic and differential pulse voltammetry techniques. As a result, the DA and CLZ sensing exhibited low detection limits (DL, 4.6 and 97.6 nM (S/N = 3)), and sensitivity (3.402 and 0.4 μA μM-1 cm-2) over a wide linear range (0.02-97.59 and 0.5-2092 μM), respectively. To go a step further, the Bi-Sn NP/CAG/SPCE was applied for the simultaneous determination of DA and CLZ which featured lower DL (23.1 and 31.3 nM (S/N = 3)), and sensitivity (0.4979 and 0.04 μA μM-1 cm-2) over a wide linear range (2-182 and 10-910 μM), respectively. The selectivity for DA and CLZ in the presence of a 10-fold concentration of their potentially interfering active species was demonstrated. Finally, this sensing methodology enables the rapid electrochemical determination of the amount of DA and CLZ in a rat brain region serum sample with successful recovery outcomes. © The Royal Society of Chemistry.

In this work, gold nanoparticle (Au NP) decorated poly(diallyldimethylammonium chloride) (PDDA) functionalized graphene hydrogel (Au NP@PDDA/GH) nanocomposites were fabricated. The resulting materials were characterized by a variety of analytical and spectroscopic techniques. Electrochemical performances of the prepared composites were examined by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and linear sweep voltammetry (LSV). The Au NPs were decorated uniformly and densely on the GO@PDDA composite material based on the electrostatic attraction and this new hierarchical nanostructure can provide a more favourable microenvironment for electron transfer. Under the optimized conditions, the Au NP@PDDA/GH nanocomposite was used as a novel sensing probe for metronidazole (MZ) which was found to have the concentration range of 0.4-656.4 μM with a correlation coefficient (0.999, limit of detection (LOD) based on (LOD = 3k/∂) of 0.097 μM), and a sensitivity of 4.286 μA μM−1. With satisfactory selectivity, reproducibility, and stability, the nanostructure we proposed offered an alternative for electrode fabrication and MZ sensing. Au NP@PDDA/GH was also applied to the reduction of MZ and pharmacy tablets by NaBH4under ambient conditions. Thus, Au NP@PDDA/GH application provides simplicity, reliability, durability, and low cost benefits. © The Royal Society of Chemistry 2020.

A molecular beam of halothane (2-bromo-2-chloro-1,1,1-trifluoroethane) is focused by a hexapolar electrostatic field and photolyzed by UV laser radiation at 234 nm. Angular and speed distributions of chlorine and bromine photofragments emitted from halothane are measured for both spin-orbit states independently. Although the dissociation energy of the C-Cl bond is larger than that of C-Br, the relative yield of Cl to Br was found to be approximately 2. Measured speed and angular distributions of atomic fragments show distinct kinetic energy release and scattering characteristics: for bromine, observed fast and aligned fragments exhibit a signature of a direct mode of dissociation for the C-Br bond, via the electronically excited potential energy surface denoted nσ*(C-Br), of repulsive nature; for chlorine, a variation in the features is observed for the dissociation pathway through nσ*(C-Cl), from a modality similar to the bromine case, leading to fragments with appreciable kinetic energy release and pronounced directionality, to a modality involving slow products, nearly isotopically distributed. The origin of this behavior can be attributed to nonadiabatic interaction operating between the nσ*(C-Br) and nσ*(C-Cl) surfaces. These results are not only relevant for a detailed understanding of adiabatic versus diabatic coupling mechanisms in the manifold of excited states populated by photon absorption, but they also point out the possibility of selectively inducing specific dissociation pathways, even when involving energetically unfavorable outcomes, such as, in this case, the prevailing rupture of the stronger C-Cl bond against that of the weaker C-Br bond. Copyright © 2020 American Chemical Society.

In this study, Liquidambar formosana tree leaves have been used as a renewable biomass precursor for preparing porous carbons (PCs). The PCs were produced by pyrolysis of natural waste of leaves after 10% KOH activation under a nitrogen atmosphere and characterized by a variety of state-of-the-art techniques. The PCs possess a large surface area, micro-/mesoporosity, and functional groups on its surface. A glassy carbon electrode modified with high PCs was explored as an efficient binder-free electrocatalyst material for the voltammetric determination of nitro isomers such as 3-nitroaniline (3-NA) and 4-nitroaniline (4-NA). Under optimal experimental conditions, the electrochemical detection of 3-NA and 4-NA was found to have a wide linear range of 0.2-115.6 and 0.5-120 μM and a low detection limit of 0.0551 and 0.0326 μM, respectively, with appreciable selectivity. This route not only enhanced the benefit from biomass wastes but also reduced the cost of producing electrode materials for electrochemical sensors. Additionally, the sensor was successfully applied in the determination of nitro isomers even in the presence of other common electroactive interference and real samples analysis (beverage and pineapple jam solutions). Therefore, the proposed method is simple, rapid, stable, sensitive, specific, reproducible, and cost-effective and can be applicable for real sample detection. © 2019 American Chemical Society.

Chicken feather-derived high-surface-area porous activated carbon (CFAC) material was prepared using chemical activation. A new composite composed of Ru-Pd nanoparticles supported on CFAC (Ru-Pd@CFAC) has been prepared by microwave-thermal reduction in the presence of the support. Characterization by XRD, Raman, BET, FE-SEM/TEM, FT-IR, TGA, XPS, HAADF-STEM-EDS, H2-chemisorption, H2-TPR, and ICP-AES was used to analyze the catalyst. This catalyst is found to be efficient for the reduction of hexavalent chromium (CrVI), potassium ferricyanide (K3[Fe(CN)6]), 4-nitrophenol (4-NP), and pendimethalin (PDM), at room temperature, and remains stable, even after several repeated runs. Moreover, it showed excellent catalytic activity compared with the monometallic counterparts. © 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim

The multiple sensing capabilities of molybdenum disulfide quantum dots (MoS2 QDs) towards metal ions were scrutinized by tuning their surface functional groups. The MoS2 QDs surface was individually modified with thiol-containing capping agents to form carboxylic-, amine- and thiol-functionalized MoS2 QDs (MoS2/COOH, MoS2/NH2 and MoS2/SH) by the facile hydrothermal method. Each as-prepared QDs exhibits strong excitation wavelength dependent fluorescence behavior. The design of MoS2 QDs based metal ion sensor was implemented based on the fluorescence turn-on mechanism. These MoS2/COOH, MoS2/NH2 and MoS2/SH QDs sensors exhibit superior performance towards the highly selective detection of Co2+, Cd2+ and Pb2+ ions, respectively, due to the varied association of each functional group towards metal ions. The resultant detection limit of Co2+, Cd2+ and Pb2+ was evaluated to be 54.5, 99.6 and 0.84 nM, respectively, and the related fluorescence turn-on mechanism is verified unambiguously. The binding energies were calculated for QDs with metal ions pairs and the results lent support to the determined sensitivity. The as-prepared QDs were also successfully demonstrated to detect the above metal ions in real water samples. While becoming potential candidates in the chemosensors based on the fluorescence probe, these surface modified MoS2 QDs can offer an excellent sensing capability for specific metal ions with extremely high selectivity.

Acid-functionalized mesoporous carbons (AF-MPCs) have been synthesized and used as adsorbents for removal of an azo dye, Eriochrome Black-T (EBT), from aqueous solution. To generate acid surface functionalities, mesoporous carbons (MPCs) were treated with sulfuric acid. Characterization of the samples was analyzed by XRD, Raman spectra, N 2 adsorption-desorption, FE-TEM, TGA, and FT-IR studies. The adsorption studies were carried out under various parameters, such as pH, adsorbent dosage, contact time, initial dye concentration solution temperature, and salt concentration. The results showed that the EBT adsorption onto samples was affected by the pH of solution; the maximum EBT ion adsorption took place at pH 1; and the adsorption uptake was increased with an increase in the initial dye concentration. Moreover, the mechanism of adsorption was investigated using kinetic, diffusion, and isotherm models. The best fit was obtained by the Langmuir model with high correlation coefficients (R 2 = 0.9463) with a maximum monolayer adsorption capacity of 117.0 mg·g -1 . The adsorbed anionic EBT dye molecules were eluted by ethanol solvent with the recovery percentage of 98%. Moreover, this study demonstrates that AF-MPCs can be successfully used as a low-cost adsorbent for the removal of EBT from aqueous solutions. © 2019 American Chemical Society.

Palladium nanoparticles encapsulated in the carbon dots (Pd/C-dots) are demonstrated to play a role of multifunctional nanohybrid in the synergetic applications of sensor and catalysis. The photochemical method is applied to synthesize Pd/C-dots in which Pd nanoparticles (NPs) are dispersedly encapsulated by C-dots layer. The nanohybrid can function as a fluorescent sensor and reductive catalyst, due to the inherent properties of C-dots and Pd NPs, respectively. The Pd/C-dots exhibit a highly selective and sensitive detection toward the nickel (Ni2+) ion with a detection limit of 7.26 × 10−9 m. Moreover, the Ni2+ is detected in MCF-7 live cells signifying the applicability of nanohybrid as a promising sensor. On the other hand, the Pd/C-dots show an excellent catalytic performance in the reduction of 4-nitrophenol and eosin yellow. A plausible mechanism for sensing and catalysis behavior is proposed. The sensor system is designed on the basis of the fluorescence turn-on when Ni2+ interacts with functional groups of the C-dots layer. The activities of catalytic reduction are mainly governed by the Pd NPs and further enhanced when the C-dots layer is incorporated. The Pd/C-dots can serve as a new paradigm for opening a potential trend in the design of multifunctional materials to diverse applications. © 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Photodissociation of CH2BrI was investigated in search of unimolecular elimination of BrI via a primary channel using cavity ring-down absorption spectroscopy (CRDS) at 248 nm. The BrI spectra were acquired involving the first three ground vibrational levels corresponding to A3Π1 ← X1Σ+ transition. With the aid of spectral simulation, the BrI rotational lines were assigned. The nascent vibrational populations for v′′ = 0, 1, and 2 levels are obtained with a population ratio of 1:(0.58 ± 0.10):(0.34 ± 0.05), corresponding to a Boltzmann-like vibrational temperature of 713 ± 49 K. The quantum yield of the ground state BrI elimination reaction is determined to be 0.044 ± 0.014. The CCSD(T)//B3LYP/MIDI! method was employed to explore the potential energy surface for the unimolecular elimination of BrI from CH2BrI.

Herein, we have meticulously derived the nanosized fluorescent aggregates from pyrene Schiff base (PS) in DMSO:water (10:90) ratio. The aggregation property of PS molecule was characterized by SEM and TEM measurements, revealed the aggregated particles are in spherical shape with ~3 nm in size. Moreover, aggregates exhibit a high fluorescence quantum yield (48%) which was effectively used for the in vitro bioimaging of two different cancer cells such as A549 and MCF-7 cells in which it exhibiting excellent biocompatibility. Further, it was estimated the capability of twofold acridine orange/ethidium bromide (AO/EB) staining to identify the apoptotic associated changes in cancer cells. Additionally, the aggregates were successfully demonstrated as a luminescent probe for the perceptive biomolecule detection of bilirubin. On the other hand, the PS molecule was successfully utilized for protein binding and metal ion sensing studies. The interaction of bovine serum albumin (BSA) with PS molecule in DMSO was using fluorescence spectroscopic method and nature of interaction was also confirmed through molecular docking analysis. The PS molecule also acts as an excellent sensor for biologically important Fe3+ ion with detection limit of 336 nM. Overall, PS molecule can be a prospective material in biological field both in solution as well as aggregated forms. © 2019 Elsevier B.V.

Both single-laser and two-laser experiments were conducted to look into the ion-imaging of Br*(2P1/2) and Br(2P3/2) photofragmented from 1-bromo-2-methylbutane in the range 232-240 nm via a detection scheme of (2+1) resonance-enhanced multiphoton ionization. The angular analysis of these photofragment distributions yields the anisotropy parameter β = 1.88 ± 0.06 for the Br∗ excited state which arises from a parallel transition, while β = 0.63 ± 0.09 for the Br ground state indicates the contribution from both a perpendicular transition and a non-adiabatic transition. When a hexapole coupled with an orienting field was implemented, the parent molecules are spatially oriented to yield an orientation efficiency |«cos θ »| of 0.15. Besides the χ angle between the recoil velocity v and the transition dipole moment μ, orienting molecules allows for the evaluation of the angle α between v and the permanent molecular dipole moment d. The angular analysis of Br∗ photofragment distribution yields χ = 11.5° and α in the range from 160° to 180° with weak dependency. In the two-laser experiments, the angular anisotropy of Br photofragment distribution was found to be smaller (0.38 ± 0.10) when the photolysis wavelength was red-shifted to 240 nm, suggesting the increasing contributions from perpendicular transitions. © 2019 American Chemical Society.

Molecular orientation techniques are becoming available in the study of elementary chemical processes, in order to highlight those structural and dynamical properties that would be concealed by random rotational motions. Recently successful orientation was achieved for asymmetric-top and chiral molecules of much larger complexity than hitherto. In this work, we report and discuss the correlation between the vectors' photofragment recoil velocity v, transition dipole moment μ, and permanent dipole moment d in a dissociation experiment on hexapole oriented 2-bromobutane, photoinitiated by a linearly polarized laser. The sliced ion images of the Br∗(2P1/2) and Br(2P3/2) photofragments were acquired at 234.0 and 254.1 nm, respectively, by a (2 + 1) resonance-enhanced multiphoton ionization technique. A detailed analysis of the sliced ion images obtained at a tilting angle 45° of laser polarization provides information on the correlation of the three vectors, which are confined by two polar angles α and χ and one azimuthal angle φμd in the recoil frame. The sliced ion images of Br fragments eliminated individually from the enantiomers at 254.1 nm yield an asymmetric factor close to zero; for this reason the photofragment angular distributions do not show significant differences. The elimination of the Br∗ fragment at 234.0 nm is mainly correlated with a parallel transition, giving rise to a large anisotropy parameter of 1.85, and thus can be considered as a single state excitation. The resulting recoil frame angles are optimized to 163° ± 8° and 164° ± 1° for α and χ, respectively, whereas φμd is approaching 0° for the best fit. Since for the present molecule, the three vectors have an only slight spatial arrangement, the photofragment angular distributions of the two enantiomers do not show appreciable differences. Theoretical and computational simulations provide us the basis to state that oriented enantiomers can be discriminated on-the-fly in photodissociation processes even initiated by non-circularly polarized light, provided that the three vectors encountered above have specific three-dimensional arrangements. The fact that Br fragment elimination involves a multi-potential dissociation carries uncertainties in theoretical estimates of the vector direction. Therefore, this work represents a preliminary but significant step on the road to chiral discrimination on-the-fly, which is shown to be best propitiated in molecules where vectors are far from having degenerate mutual angular directions. © 2019 the Owner Societies.