Kuei-Hsien Chen

Abstract Solar-driven CO2 reduction holds great promise for sustainable energy, yet the role of atomic active sites in governing intermediate formation and conversion remains poorly understood. Herein, a synergistic strategy using Ni single atoms (SAs) and surface oxygen vacancies (Ov) is reported to regulate the CO2 reduction pathway on the Bi2WO6 photocatalyst. Combining in-situ techniques and theoretical modeling, the reaction mechanism and the structure-activity relationship is elucidated. In-situ X-ray absorption spectroscopy identifies Bi and Ni as active sites, and in-situ diffuse reflectance infrared Fourier transform spectroscopy demonstrates that adsorption of H2O and CO2 readily forms CO32? species on the Ov-rich catalyst. Optimally balancing Ni SAs and Ov lowers the energy barrier for the formation and dehydration of a key COOH intermediate, leading to favorable CO formation and desorption. Consequently, a superior CO production efficiency of 53.49 µmol g?1 is achieved, surpassing previous reports on Bi2WO6-based catalysts for gas-phase CO2 photoreduction.

Abstract The lack of intrinsic active sites for photocatalytic CO2 reduction reaction (CO2RR) and fast recombination rate of charge carriers are the main obstacles to achieving high photocatalytic activity. In this work, a novel phosphorus and boron binary-doped graphitic carbon nitride, highly porous material that exhibits powerful photocatalytic CO2 reduction activity, specifically toward selective CO generation, is disclosed. The coexistence of Lewis-acidic and Lewis-basic sites plays a key role in tuning the electronic structure, promoting charge distribution, extending light-harvesting ability, and promoting dissociation of excitons into active carriers. Porosity and dual dopants create local chemical environments that activate the pyridinic nitrogen atom between the phosphorus and boron atoms on the exposed surface, enabling it to function as an active site for CO2RR. The P?N?B triad is found to lower the activation barrier for reduction of CO2 by stabilizing the COOH reaction intermediate and altering the rate-determining step. As a result, CO yield increased to 22.45 µmol g?1 h?1 under visible light irradiation, which is ≈12 times larger than that of pristine graphitic carbon nitride. This study provides insights into the mechanism of charge carrier dynamics and active site determination, contributing to the understanding of the photocatalytic CO2RR mechanism.

Reduction of CO2 to value-added hydrocarbons through artificial photosynthesis is one of the way to address the energy crisis and climate change issues. It is known that lowering the activation energy of CO2 molecules on the photocatalyst surface and key intermediates is crucial in photocatalytic CO2 reduction. Herein, we present phosphorus-implanted 20-nm SnS2 continuous thin film with sulfur vacancies (i.e., SV-SnS2:P where P substitutes on S sites). The fabrication process involves thermal evaporation, post-sulfurization, and ion implantation. Our gas-phase photocatalytic experiments show an enhanced and selective CO2 photoreduction to CH4 with a yield of 0.13 µmol cm−2 and selectivity of 92 % under solar-light irradiation for 4 h over an optimal ∼4.5 % P and ∼16 % SV. Experimental observations, conducted through X-ray absorption near edge, in situ near ambient pressure X-ray photoelectron, and in situ Fourier transform infrared spectroscopies, along with first-principle density functional theory calculations. Results reveal that P dopant is significantly affected by nearby SV via local charge density transfer from P to the nearest Sn and next-nearest S neighbor atoms, consequently, leads to the stabilization of *COOH and *CHO intermediates, where asterisks stand for P as the active site. Our results demonstrate how active site modulation, without using precious co-catalysts, plays a crucial role in intermediate stabilization in a wireless photocatalysis process.

Single-atom-supported metal oxides have attracted extensive interest in energy catalysis, offering a promising avenue for mitigating greenhouse gas emissions and environmental pollution. This study presents a facile synthesis of single-atom Fe-modified Bi2WO6 photocatalysts. By carefully tuning the Fe ratios, the 1.5Fe-Bi2WO6 sample demonstrates exceptional photocatalytic efficiency in CO2 to CO reduction (36.78 μmol g−1). Additionally, an outstanding NO removal performance is also achieved through this photocatalyst with an impressively low conversion of toxic NO2 at just 0.37%. The reaction intermediates and mechanisms governing the photocatalytic reduction of CO2 into CO are elucidated using in situ DRIFTS and in situ XAS techniques. Regarding NO removal, the introduction of Fe single-atoms, along with induced oxygen vacancies, plays a pivotal role in facilitating the transformation of NO and NO2 into nitrate by stabilizing NO and NO2 species. Mechanistic insights into photocatalytic NO oxidation are garnered through scavenger trapping and EPR experiments employing DMPO. This study emphasizes single-atom-supported metal oxide's potential in sustainable chemistry and air purification, providing a promising solution for urgent environmental challenges.

n/a

A fine control of carriers in solids is the most essential thing while exploring any functionality. For a ternary skutterudite like CoSn1·5Te1.5−x, which has been recently recognized as a potential material for thermoelectric conversion, the dominant carrier could be either electrons or holes via chemically tuning the quaternary Sn2Te2 rings in the structure. Both theoretical calculation and different spectroscopic probes, such as X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) were employed to unveil the conduction type switching details. On the other hand, a Ni-for-Co substitution was applied to enhance electronic transport, and thereby the thermoelectric power factor. Thanks to the substantial cut-off of lattice thermal conductivity by the characteristic Sn2Te2 rings in the skutterudite structure, ultimately a 70-fold increase in the dimensionless figure-of-merit (zT) is achieved at 723 K with the nominal composition Co0·95Ni0·05Sn1·5Te1.5.

Abstract Effects of electronic and atomic structures of V-doped 2D layered SnS2 are studied using X-ray spectroscopy for the development of photocatalytic/photovoltaic applications. Extended X-ray absorption fine structure measurements at V K-edge reveal the presence of VO and VS bonds which form the intercalation of tetrahedral OVS sites in the van der Waals (vdW) gap of SnS2 layers. X-ray absorption near-edge structure (XANES) reveals not only valence state of V dopant in SnS2 is ≈4+ but also the charge transfer (CT) from V to ligands, supported by V Lα,β resonant inelastic X-ray scattering. These results suggest V doping produces extra interlayer covalent interactions and additional conducting channels, which increase the electronic conductivity and CT. This gives rapid transport of photo-excited electrons and effective carrier separation in layered SnS2. Additionally, valence-band photoemission spectra and S K-edge XANES indicate that the density of states near/at valence-band maximum is shifted to lower binding energy in V-doped SnS2 compare to pristine SnS2 and exhibits band gap shrinkage. These findings support first-principles density functional theory calculations of the interstitially tetrahedral OVS site intercalated in the vdW gap, highlighting the CT from V to ligands in V-doped SnS2.

Recent advances in nanotechnology, especially the development of integrated nanostructured materials, have offered unprecedented opportunities for photocatalytic CO2 reduction. Compared to bulk semiconductor photocatalysts, most of these nanostructured photocatalysts offer at least one advantage in areas such as photogenerated carrier kinetics, light absorption, and active surface area, supporting improved photochemical reaction efficiencies. In this review, we briefly cover the cutting-edge research activities in the area of integrated nanostructured catalysts for photochemical CO2 reduction, including aqueous and gas-phase reactions. Primarily explored are the basic principles of tailor-made nanostructured composite photocatalysts and how nanostructuring influences photochemical performance. Specifically, we summarize the recent developments related to integrated nanostructured materials for photocatalytic CO2 reduction, mainly in the following five categories: carbon-based nano-architectures, metal–organic frameworks, covalent-organic frameworks, conjugated porous polymers, and layered double hydroxide-based inorganic hybrids. Besides the technical aspects of nanostructure-enhanced catalytic performance in photochemical CO2 reduction, some future research trends and promising strategies are addressed.

Designing highly conducting metal–organic frameworks (MOFs) is currently a subject of great interest for their potential applications in diverse areas encompassing energy storage and generation. Herein, a strategic design in which a metal–sulfur plane is integrated within a MOF to achieve high electrical conductivity, is successfully demonstrated. The MOF {[Cu2(6-Hmna)(6-mn)]·NH4}n (1, 6-Hmna = 6-mercaptonicotinic acid, 6-mn = 6-mercaptonicotinate), consisting of a two dimensional (–Cu–S–)n plane, is synthesized from the reaction of Cu(NO3)2, and 6,6′-dithiodinicotinic acid via the in situ cleavage of an S–S bond under hydrothermal conditions. A single crystal of the MOF is found to have a low activation energy (6 meV), small bandgap (1.34 eV) and a highest electrical conductivity (10.96 S cm−1) among MOFs for single crystal measurements. This approach provides an ideal roadmap for producing highly conductive MOFs with great potential for applications in batteries, thermoelectric, supercapacitors and related areas.

Cr substituted tetrahedrites with the chemical formula Cu12−xCrxSb4S13 (x = 0.15, 0.25, 0.35, 0.5, 0.75, 1.0) have been synthesised for thermoelectric study. Cr substitutes at the Cu site to optimize the thermoelectric properties and achieve a higher figure of merit (zT). X-Ray diffraction (XRD) analysis revealed that the tetrahedrite is the major phase with minor impurity phases. Electron probe microanalysis (EPMA) shows the formation of tetrahedrite main phase with near stoichiometry and the presence of Cu3SbS4, CuSbS2 and Sb as secondary phases. X-ray photoelectron spectroscopy (XPS) shows the oxidation state of Cu, Sb and S as +1, +3 and −2, respectively, whereas for Cr, it could not be identified. Temperature-dependent magnetic susceptibility of sample x = 0.75 shows antiferromagnetic correlation originating from the Cr ion. The calculated effective magnetic moment of 2.83 μB per Cr atom indicates the presence of Cr+4 in this sample. The decrease in the electrical resistivity upon doping indicates the compensation of holes due to the substitution of Cr at the Cu site. But the x = 0.35 sample is not following the trend due to larger compensation of holes with an activation energy of 124.6 meV. The temperature-dependent behaviour of electrical resistivity shows the shift in the Fermi level from the valance band towards the band gap. The absolute Seebeck coefficient is positive throughout the temperature range and follows a similar trend as that of electrical resistivity, with the exception of the x = 0.35 sample. The electronic thermal conductivity reduces due to hole compensation caused by Cr substitution. Moreover, the substitution of Cr effectively reduces the lattice thermal conductivity due to point defect scattering of phonons. A maximum zT of 1.0 is achieved for sample x = 0.35 at 700 K.

Photocatalytic formation of hydrocarbons using solar energy via artificial photosynthesis is a highly desirable renewable-energy source for replacing conventional fossil fuels. Using an l-cysteine-based hydrothermal process, here we synthesize a carbon-doped SnS2 (SnS2-C) metal dichalcogenide nanostructure, which exhibits a highly active and selective photocatalytic conversion of CO2 to hydrocarbons under visible-light. The interstitial carbon doping induced microstrain in the SnS2 lattice, resulting in different photophysical properties as compared with undoped SnS2. This SnS2-C photocatalyst significantly enhances the CO2 reduction activity under visible light, attaining a photochemical quantum efficiency of above 0.7%. The SnS2-C photocatalyst represents an important contribution towards high quantum efficiency artificial photosynthesis based on gas phase photocatalytic CO2 reduction under visible light, where the in situ carbon-doped SnS2 nanostructure improves the stability and the light harvesting and charge separation efficiency, and significantly enhances the photocatalytic activity.