Kuei-Hsien Chen

Abstract Double-atom site catalysts (DASs) have emerged as a recent trend in the oxygen reduction reaction (ORR), thereby modifying the intermediate adsorption energies and increasing the activity. However, the lack of an efficient dual atom site to improve activity and durability has limited these catalysts from widespread application. Herein, the nitrogen-coordinated iron and tin-based DASs (Fe-Sn-N/C) catalyst are synthesized for ORR. This catalyst has a high activity with ORR half-wave potentials (E1/2) of 0.92 V in alkaline, which is higher than those of the state-of-the-art Pt/C (E1/2 = 0.83 V), Fe-N/C (E1/2 = 0.83 V), and Sn-N/C (E1/2 = 0.77 V). Scanning electron transmission microscopy analysis confirmed the atomically distributed Fe and Sn sites on the N-doped carbon network. X-ray absorption spectroscopy analysis revealed the charge transfer between Fe and Sn. Both experimental and theoretical results indicate that the Sn with Fe-NC (Fe-Sn-N/C) induces charge redistribution, weakening the binding strength of oxygenated intermediates and leading to improved ORR activity. This study provides the synergistic effects of DASs catalysts and addresses the impacts of P-block elements on d-block transition metals in ORR.

An innovative strategy has been developed to activate the basal planes in molybdenum disulfide (MoS2) to improve their electrocatalytic activity by controlling surface electron accumulation (SEA) through aging, annealing, and nitrogen-plasma treatments. The optimal hydrogen evolution reaction (HER) performance was obtained on the surface treated with nitrogen-plasma for 120 s. An overpotential of 0.20 V and a Tafel slope of 120 mV dec−1 were achieved for the optimized condition. The angle-resolved photoemission spectroscopy measurement confirmed the HER efficiency enhanced by the SEA conjugated with the sulfur vacancy active sites in the MoS2 basal planes. This study provides new insight into optimizing MoS2 catalysts for energy applications.

Gas bubble evolution is an important phenomenon in many electrochemical processes and it is highly sensitive to the surface properties. Here we visualize the gas bubble dynamics on the surface of different graphene substrates during hydrogen evolution reaction (HER) using atomic force microscopy combined with scanning electrochemical microscopy. The low overpotential and low surface hydrophobicity of few-layer graphene formed on C-phase SiC causes the uniform distribution of hydrogen nanobubbles, which easily depart from the surface during the reaction. Conversely, the high overpotential and more hydrophobic surface of HOPG induces hydrogen bubbles to linger on the surface for an extended duration, leading to its accumulation and the subsequent formation of microbubbles. This in-situ nanoscale electrochemical mapping of hydrogen bubble dynamics provides new insight into electrocatalytic HER that occurs on non-metal electrodes.

Utilization of g-C3N4 as a single photocatalyst material without combination with other semiconductor remains challenging. Herein, we report a facile green method for synthesizing a metal free modified g-C3N4 photocatalyst. The modification process combines four different strategies in a one-pot thermal reaction: non-metal doping, porosity generation, functionalization with amino groups, and thermal oxidation etching. The as-prepared amino-functionalized ultrathin nanoporous boron-doped g-C3N4 exhibited a high specific surface area of 143.2 m2 g−1 which resulted in abundant adsorption sites for CO2 and water molecules. The surface amino groups act as Lewis basic sites to adsorb acidic CO2 molecules, which can also serve as active sites to facilitate hydrogen generation. Besides, the simultaneous use of ammonium chloride as a dynamic gas bubble template along with thermal oxidation etching efficiently boosts the delamination of the g-C3N4 layers to produce ultrathin sheets; this leads to stronger light–matter interactions and efficient charge generation. Consequently, the newly modified g-C3N4 achieved selective gas-phase CO2 reduction into CO with a production yield of 21.95 µmol g-1, in the absence of any cocatalyst. Moreover, a high hydrogen generation rate of 3800 µmol g-1 h-1 and prominent apparent quantum yield of 10.6% were recorded. This work opens up a new avenue to explore different rational modifications of g-C3N4 nanosheets for the efficient production of clean energy.

Abstract The lack of intrinsic active sites for photocatalytic CO2 reduction reaction (CO2RR) and fast recombination rate of charge carriers are the main obstacles to achieving high photocatalytic activity. In this work, a novel phosphorus and boron binary-doped graphitic carbon nitride, highly porous material that exhibits powerful photocatalytic CO2 reduction activity, specifically toward selective CO generation, is disclosed. The coexistence of Lewis-acidic and Lewis-basic sites plays a key role in tuning the electronic structure, promoting charge distribution, extending light-harvesting ability, and promoting dissociation of excitons into active carriers. Porosity and dual dopants create local chemical environments that activate the pyridinic nitrogen atom between the phosphorus and boron atoms on the exposed surface, enabling it to function as an active site for CO2RR. The P?N?B triad is found to lower the activation barrier for reduction of CO2 by stabilizing the COOH reaction intermediate and altering the rate-determining step. As a result, CO yield increased to 22.45 µmol g?1 h?1 under visible light irradiation, which is ≈12 times larger than that of pristine graphitic carbon nitride. This study provides insights into the mechanism of charge carrier dynamics and active site determination, contributing to the understanding of the photocatalytic CO2RR mechanism.

Graphitic carbon nitride (CN) has emerged as a highly promising material in the photocatalysis field. However, its bulk structure suffers from a lack of active sites, limiting its practical application. Herein, a boron-doped CN (BCN) was prepared by a green gas-blowing-assisted thermal polymerization and then subjected to different exfoliation processes in order to delaminate the layered structure and tune the surface-active sites. A thorough comparative study shows that thermal exfoliation creates unsaturated nitrogen sites and induces the formation of interconnected layers that act as an electron diffusion channel for better charge transport. Furthermore, the thermally exfoliated BCN is rich in structural disorders that serve as dissociation defects for photoinduced charge carriers with a low exciton binding energy of 27 meV. Experimental results supported by theoretical calculations show that the nitrogen adjacent to boron is activated by the surrounding surface amino groups and the perforated texture to serve as an active adsorption site towards CO2 and H2O. Consequently, the exfoliated BCN acts as an outstanding bifunctional photocatalyst towards CO2 reduction into CO (40.41 μmol g−1 h−1) and prominent hydrogen evolution (4740 μmol g−1 h−1, 12.2% apparent quantum yield (AQY)).

AbstractPorous α-Fe2O3 nanoparticles are directly grown on acid treated carbon cloth (ACC) using a simple hydrothermal method (denoted as ACC-α-Fe2O3) for employment as a flexible and wearable electrochemical electrode. The catalytic activity of ACC-α-Fe2O3 allowing the detection of dopamine (DA) is systematically investigated. The results showed that the ACC-α-Fe2O3 electrode exhibits impressive electrochemical sensitivity, stability and selectivity for the detection of DA. The detection limit determined with the amperometric method appears to be around 50nM with a linear range of 0.074–113μM. The impressive DA sensing ability of the as prepared ACC-α-Fe2O3 electrode is due to the good electrochemical behavior and high electroactive surface area (19.96cm2) of α-Fe2O3 nanoparticles anchored on the highly conductive ACC. It is worth noting that such remarkable sensing properties can be maintained even when the electrode is in a folded configuration.