Kuei-Hsien Chen

Abstract Solar-driven CO2 reduction holds great promise for sustainable energy, yet the role of atomic active sites in governing intermediate formation and conversion remains poorly understood. Herein, a synergistic strategy using Ni single atoms (SAs) and surface oxygen vacancies (Ov) is reported to regulate the CO2 reduction pathway on the Bi2WO6 photocatalyst. Combining in-situ techniques and theoretical modeling, the reaction mechanism and the structure-activity relationship is elucidated. In-situ X-ray absorption spectroscopy identifies Bi and Ni as active sites, and in-situ diffuse reflectance infrared Fourier transform spectroscopy demonstrates that adsorption of H2O and CO2 readily forms CO32? species on the Ov-rich catalyst. Optimally balancing Ni SAs and Ov lowers the energy barrier for the formation and dehydration of a key COOH intermediate, leading to favorable CO formation and desorption. Consequently, a superior CO production efficiency of 53.49 µmol g?1 is achieved, surpassing previous reports on Bi2WO6-based catalysts for gas-phase CO2 photoreduction.

Abstract The lack of intrinsic active sites for photocatalytic CO2 reduction reaction (CO2RR) and fast recombination rate of charge carriers are the main obstacles to achieving high photocatalytic activity. In this work, a novel phosphorus and boron binary-doped graphitic carbon nitride, highly porous material that exhibits powerful photocatalytic CO2 reduction activity, specifically toward selective CO generation, is disclosed. The coexistence of Lewis-acidic and Lewis-basic sites plays a key role in tuning the electronic structure, promoting charge distribution, extending light-harvesting ability, and promoting dissociation of excitons into active carriers. Porosity and dual dopants create local chemical environments that activate the pyridinic nitrogen atom between the phosphorus and boron atoms on the exposed surface, enabling it to function as an active site for CO2RR. The P?N?B triad is found to lower the activation barrier for reduction of CO2 by stabilizing the COOH reaction intermediate and altering the rate-determining step. As a result, CO yield increased to 22.45 µmol g?1 h?1 under visible light irradiation, which is ≈12 times larger than that of pristine graphitic carbon nitride. This study provides insights into the mechanism of charge carrier dynamics and active site determination, contributing to the understanding of the photocatalytic CO2RR mechanism.

An innovative strategy has been developed to activate the basal planes in molybdenum disulfide (MoS2) to improve their electrocatalytic activity by controlling surface electron accumulation (SEA) through aging, annealing, and nitrogen-plasma treatments. The optimal hydrogen evolution reaction (HER) performance was obtained on the surface treated with nitrogen-plasma for 120 s. An overpotential of 0.20 V and a Tafel slope of 120 mV dec−1 were achieved for the optimized condition. The angle-resolved photoemission spectroscopy measurement confirmed the HER efficiency enhanced by the SEA conjugated with the sulfur vacancy active sites in the MoS2 basal planes. This study provides new insight into optimizing MoS2 catalysts for energy applications.

Reduction of CO2 to value-added hydrocarbons through artificial photosynthesis is one of the way to address the energy crisis and climate change issues. It is known that lowering the activation energy of CO2 molecules on the photocatalyst surface and key intermediates is crucial in photocatalytic CO2 reduction. Herein, we present phosphorus-implanted 20-nm SnS2 continuous thin film with sulfur vacancies (i.e., SV-SnS2:P where P substitutes on S sites). The fabrication process involves thermal evaporation, post-sulfurization, and ion implantation. Our gas-phase photocatalytic experiments show an enhanced and selective CO2 photoreduction to CH4 with a yield of 0.13 µmol cm−2 and selectivity of 92 % under solar-light irradiation for 4 h over an optimal ∼4.5 % P and ∼16 % SV. Experimental observations, conducted through X-ray absorption near edge, in situ near ambient pressure X-ray photoelectron, and in situ Fourier transform infrared spectroscopies, along with first-principle density functional theory calculations. Results reveal that P dopant is significantly affected by nearby SV via local charge density transfer from P to the nearest Sn and next-nearest S neighbor atoms, consequently, leads to the stabilization of *COOH and *CHO intermediates, where asterisks stand for P as the active site. Our results demonstrate how active site modulation, without using precious co-catalysts, plays a crucial role in intermediate stabilization in a wireless photocatalysis process.

Gas bubble evolution is an important phenomenon in many electrochemical processes and it is highly sensitive to the surface properties. Here we visualize the gas bubble dynamics on the surface of different graphene substrates during hydrogen evolution reaction (HER) using atomic force microscopy combined with scanning electrochemical microscopy. The low overpotential and low surface hydrophobicity of few-layer graphene formed on C-phase SiC causes the uniform distribution of hydrogen nanobubbles, which easily depart from the surface during the reaction. Conversely, the high overpotential and more hydrophobic surface of HOPG induces hydrogen bubbles to linger on the surface for an extended duration, leading to its accumulation and the subsequent formation of microbubbles. This in-situ nanoscale electrochemical mapping of hydrogen bubble dynamics provides new insight into electrocatalytic HER that occurs on non-metal electrodes.

Designing an organic polymer photocatalyst for efficient hydrogen evolution with visible and near-infrared (NIR) light activity is still a major challenge. Unlike the common behavior of gradually increasing the charge recombination while shrinking the bandgap, we present here a series of polymer nanoparticles (Pdots) based on ITIC and BTIC units with different π-linkers between the acceptor-donor-acceptor (A-D-A) repeated moieties of the polymer. These polymers act as an efficient single polymer photocatalyst for H2 evolution under both visible and NIR light, without combining or hybridizing with other materials. Importantly, the difluorothiophene (ThF) π-linker facilitates the charge transfer between acceptors of different repeated moieties (A-D-A-(π-Linker)-A-D-A), leading to the enhancement of charge separation between D and A. As a result, the PITIC-ThF Pdots exhibit superior hydrogen evolution rates of 279 µmol/h and 20.5 µmol/h with visible (>420 nm) and NIR (>780 nm) light irradiation, respectively. Furthermore, PITIC-ThF Pdots exhibit a promising apparent quantum yield (AQY) at 700 nm (4.76%).

Abstract Double-atom site catalysts (DASs) have emerged as a recent trend in the oxygen reduction reaction (ORR), thereby modifying the intermediate adsorption energies and increasing the activity. However, the lack of an efficient dual atom site to improve activity and durability has limited these catalysts from widespread application. Herein, the nitrogen-coordinated iron and tin-based DASs (Fe-Sn-N/C) catalyst are synthesized for ORR. This catalyst has a high activity with ORR half-wave potentials (E1/2) of 0.92 V in alkaline, which is higher than those of the state-of-the-art Pt/C (E1/2 = 0.83 V), Fe-N/C (E1/2 = 0.83 V), and Sn-N/C (E1/2 = 0.77 V). Scanning electron transmission microscopy analysis confirmed the atomically distributed Fe and Sn sites on the N-doped carbon network. X-ray absorption spectroscopy analysis revealed the charge transfer between Fe and Sn. Both experimental and theoretical results indicate that the Sn with Fe-NC (Fe-Sn-N/C) induces charge redistribution, weakening the binding strength of oxygenated intermediates and leading to improved ORR activity. This study provides the synergistic effects of DASs catalysts and addresses the impacts of P-block elements on d-block transition metals in ORR.

Single-atom-supported metal oxides have attracted extensive interest in energy catalysis, offering a promising avenue for mitigating greenhouse gas emissions and environmental pollution. This study presents a facile synthesis of single-atom Fe-modified Bi2WO6 photocatalysts. By carefully tuning the Fe ratios, the 1.5Fe-Bi2WO6 sample demonstrates exceptional photocatalytic efficiency in CO2 to CO reduction (36.78 μmol g−1). Additionally, an outstanding NO removal performance is also achieved through this photocatalyst with an impressively low conversion of toxic NO2 at just 0.37%. The reaction intermediates and mechanisms governing the photocatalytic reduction of CO2 into CO are elucidated using in situ DRIFTS and in situ XAS techniques. Regarding NO removal, the introduction of Fe single-atoms, along with induced oxygen vacancies, plays a pivotal role in facilitating the transformation of NO and NO2 into nitrate by stabilizing NO and NO2 species. Mechanistic insights into photocatalytic NO oxidation are garnered through scavenger trapping and EPR experiments employing DMPO. This study emphasizes single-atom-supported metal oxide's potential in sustainable chemistry and air purification, providing a promising solution for urgent environmental challenges.

Achieving lithium-ion batteries with both excellent electrochemical performance and cycling stability is a top priority for their real-world applications. This work reports high-performance and stable Cu2ZnSnS4 (CZTS) anode materials encapsulated by nitrogen-doped carbon (CZTS@N-C) for advanced lithium-ion battery application. Ex-situ X-ray photoelectron spectroscopy and transmission electron microscopy revealed that the nitrogen-doped carbon network features a more conducive solid-electrolyte interphase that enables lower charge-transfer resistance and fast Li+ diffusion kinetics with negligible initial irreversible capacity loss. As a result, the CZTS@N-C electrode delivers a significantly enhanced capacity of 710 mAh g−1 with 73% capacity retention after 220 cycles at a current rate of 0.5 mA g−1 and superior rate performance compared to that of unmodified CZTS. Additionally, the study sheds light on the fast lithiation dynamics chemistry of CZTS@N-C through kinetics analysis, explored by in-situ Raman, ex-situ X-ray absorption, and in-situ electrochemical impedance. This study provides a new approach for fabricating high-performance, durable conductive polymer-encapsulated low-cost transition-metal-sulfide anode materials.

Abstract Electrochemical reduction of oxygen into hydrogen peroxide in an acidic medium offers an energy-efficient and green H2O2 synthesis as an alternative to the energy-intensive anthraquinone process. Unfortunately, high overpotential, low production rates, and fierce competition from traditional four-electron reduction limit it. In this study, a metalloenzyme-like active structure is mimicked in carbon-based single-atom electrocatalysts for oxygen reduction to H2O2. Using a carbonization strategy, the primary electronic structure of the metal center with nitrogen and oxygen coordination is modulated, followed by epoxy oxygen functionalities close to the metal active sites. In an acidic medium, CoNOC active structures proceed with greater than 98% H2O2 selectivity (2e?/2H+) rather than CoNC active sites that are selective to H2O (4e?/4H+). Among all MNOC (M = Fe, Co, Mn, and Ni) single-atom electrocatalysts, the CoNOC is the most selective (> 98%) for H2O2 production, with a mass activity of 10 A g?1 at 0.60 V vs. RHE. X-ray absorption spectroscopy is used to identify the formation of unsymmetrical MNOC active structures. Experimental results are also compared to density functional theory calculations, which revealed that the structure-activity relationship of the epoxy-surrounded CoNOC active structure reaches optimum (?G*OOH) binding energies for high selectivity.

Graphitic carbon nitride (CN) has emerged as a highly promising material in the photocatalysis field. However, its bulk structure suffers from a lack of active sites, limiting its practical application. Herein, a boron-doped CN (BCN) was prepared by a green gas-blowing-assisted thermal polymerization and then subjected to different exfoliation processes in order to delaminate the layered structure and tune the surface-active sites. A thorough comparative study shows that thermal exfoliation creates unsaturated nitrogen sites and induces the formation of interconnected layers that act as an electron diffusion channel for better charge transport. Furthermore, the thermally exfoliated BCN is rich in structural disorders that serve as dissociation defects for photoinduced charge carriers with a low exciton binding energy of 27 meV. Experimental results supported by theoretical calculations show that the nitrogen adjacent to boron is activated by the surrounding surface amino groups and the perforated texture to serve as an active adsorption site towards CO2 and H2O. Consequently, the exfoliated BCN acts as an outstanding bifunctional photocatalyst towards CO2 reduction into CO (40.41 μmol g−1 h−1) and prominent hydrogen evolution (4740 μmol g−1 h−1, 12.2% apparent quantum yield (AQY)).

Ascertaining the function of in-plane intrinsic defects and edge atoms is necessary for developing efficient low-dimensional photocatalysts. We report the wireless photocatalytic CO2 reduction to CH4 over reconstructed edge atoms of monolayer 2H-WSe2 artificial leaves. Our first-principles calculations demonstrate that reconstructed and imperfect edge configurations enable CO2 binding to form linear and bent molecules. Experimental results show that the solar-to-fuel quantum efficiency is a reciprocal function of the flake size. It also indicates that the consumed electron rate per edge atom is two orders of magnitude larger than the in-plane intrinsic defects. Further, nanoscale redox mapping at the monolayer WSe2–liquid interface confirms that the edge is the most preferred region for charge transfer. Our results pave the way for designing a new class of monolayer transition metal dichalcogenides with reconstructed edges as a non-precious co-catalyst for wired or wireless hydrogen evolution or CO2 reduction reactions.

n/a

A fine control of carriers in solids is the most essential thing while exploring any functionality. For a ternary skutterudite like CoSn1·5Te1.5−x, which has been recently recognized as a potential material for thermoelectric conversion, the dominant carrier could be either electrons or holes via chemically tuning the quaternary Sn2Te2 rings in the structure. Both theoretical calculation and different spectroscopic probes, such as X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) were employed to unveil the conduction type switching details. On the other hand, a Ni-for-Co substitution was applied to enhance electronic transport, and thereby the thermoelectric power factor. Thanks to the substantial cut-off of lattice thermal conductivity by the characteristic Sn2Te2 rings in the skutterudite structure, ultimately a 70-fold increase in the dimensionless figure-of-merit (zT) is achieved at 723 K with the nominal composition Co0·95Ni0·05Sn1·5Te1.5.

Tin monosulfide (SnS) is a promising light-harvesting material for solar cell applications, owing to its potential for large-scale production, cost-effectiveness, eco-friendly source materials, and long-term stability. However, SnS crystallizes in an orthorhombic structure, which results in a highly anisotropic charge transport behavior. Tailoring the crystallographic orientation of the SnS absorber layer plays a critical role in the enhancement of the transfer of charge carriers and the power conversion efficiency (PCE). By controlling the substrate tilting angle and temperature ramp rate in vapor transport deposition, the crystal growth orientation was tuned to a preferred direction which significantly suppressed the unfavorable (040) crystallographic plane. Through the combination of these two approaches, the PCE could be increased from 0.11% to 2%. The effect of the tilting angle was numerically simulated to investigate its role in controlling the film uniformity and directing the film growth. In addition, the correlation between the texture coefficient of the (040) plane and the charge transport properties was determined by a combination of analytical methods such as device performance studies, electrochemical impedance spectroscopy, along with transient photovoltage, space-charge-limited current, and dark current measurements. These techniques were blended together to prove that the marked improvement in PCE can be ascribed to a reduced charge recombination (in both SnS bulk and interfaces) and an enhanced hole mobility.

Direct Z-scheme heterojunctions are widely used for photocatalytic water splitting and CO2 reduction due to facilitating well-separated photogenerated charge carriers and spatial isolation of redox reactions. Here, using a facile two-step hydrothermal and ion-exchange method, we uniformly decorate silver orthophosphate (i.e., Ag3PO4) quantum dots with an average characteristic size of ∼10 nm over tin(iv) sulphide (i.e., SnS2) nanosheets to form a 0D/2D heterojunction. The direct Z-scheme mechanism, i.e. charge transport for efficient electron (from SnS2) and hole (from Ag3PO4) recombination, is confirmed by the following experiments: (i) ultraviolet and X-ray photoelectron spectroscopies; (ii) photodeposition of Pt and PbO2 nanoparticles on reduction and oxidation sites, respectively; (iii) in situ X-ray photoelectron spectroscopy; and (iv) electron paramagnetic resonance spectroscopy. Owing to the photoreduction properties of Ag3PO4 with orthophosphate vacancies, Z-scheme charge carrier transfer, and efficient exciton dissociation, an optimized heterojunction shows a high CO2-to-CO reduction yield of 18.3 μmol g−1 h−1 with an illustrious selectivity of ∼95% under light illumination, which is about 3.0 and 47.8 times larger than that of Ag3PO4 and SnS2, respectively. The carbon source for the CO product is verified using a 13CO2 isotopic experiment. Moreover, by tracing the peak at ∼1190 cm−1 in the dark and under light irradiation, in situ diffuse reflectance infrared Fourier transform spectroscopy demonstrates that the CO2 reduction pathway goes through the COOH* intermediate.

Although hematite (i.e., α-Fe2O3) has been widely investigated in photoelectrochemical water oxidation studies due to its high theoretical photocurrent density, it still suffers from serious surface charge recombination and low photoelectrochemical stability. Here we report an in-situ electrochemical method to form a uniform and ultrathin (i.e., 3–5 nm) passivation layer all over the porosities of the optimized ~3.2% Ti-doped α-Fe2O3 photoanode. We unveil the amorphous and defective nature of the in-situ derived layer assigning to a high concentration of oxygen vacancy and intercalated potassium atoms there, i.e., the formation of Ti/K co-doped defective α-Fe2O3-x. Owing to the efficient passivation of surface states, alleviated surface-potential fluctuations, and low charge-transfer resistance at the interface, photoanodes show an average of ~60% enhancement in the photoelectrochemical performance, applied bias absorbed photon-to-current efficiency of 0.43%, and Faradaic efficiency of ~88%. Moreover, the passivation layer prevents direct contact between the electrode material and electrolyte, resulting in less degradation and outstanding photoelectrochemical stability with photocurrent retention of ~95% after ~100 hours, albeit by performing several successive in-situ electrochemical passivation processes. This work presents an industrially scalable method to controllably engineer the interfaces of semiconductors–electrolytes with precious metal-free defective hematite-based co-catalysts for sustainable photoelectrochemical solar-to-fuel conversion applications.

Abstract Effects of electronic and atomic structures of V-doped 2D layered SnS2 are studied using X-ray spectroscopy for the development of photocatalytic/photovoltaic applications. Extended X-ray absorption fine structure measurements at V K-edge reveal the presence of VO and VS bonds which form the intercalation of tetrahedral OVS sites in the van der Waals (vdW) gap of SnS2 layers. X-ray absorption near-edge structure (XANES) reveals not only valence state of V dopant in SnS2 is ≈4+ but also the charge transfer (CT) from V to ligands, supported by V Lα,β resonant inelastic X-ray scattering. These results suggest V doping produces extra interlayer covalent interactions and additional conducting channels, which increase the electronic conductivity and CT. This gives rapid transport of photo-excited electrons and effective carrier separation in layered SnS2. Additionally, valence-band photoemission spectra and S K-edge XANES indicate that the density of states near/at valence-band maximum is shifted to lower binding energy in V-doped SnS2 compare to pristine SnS2 and exhibits band gap shrinkage. These findings support first-principles density functional theory calculations of the interstitially tetrahedral OVS site intercalated in the vdW gap, highlighting the CT from V to ligands in V-doped SnS2.

Solar cells based on kesterite Cu2ZnSnSe4 (CZTSe) compounds with earth-abundant elements are highly desirable for the low-cost and high-efficiency production of renewable energy. However, the occurrence of intrinsic defects substantially impairs the photovoltaic properties of CZTSe. Herein, a cation substitution method to control and passivate the defect states in bandgap of kesterite CZTSe by incorporating Ag ions is introduced. Intensity-dependent low-temperature photoluminescence measurements show that Ag incorporation can reduce the density and depth of intrinsic defects in CZTSe. The results reveal that 10% Ag-alloyed CZTSe provides the shallowest defect states and less nonradiative recombination. It is also confirmed by first-principles calculations that Ag incorporation enables the formation and suppresses the beneficial and detrimental defects, respectively. Based on the theoretical results, the observed subband photoluminescence peaks can be assigned to the intrinsic point and cluster defects. The best power conversion efficiency of 10.2% is achieved for the 10% Ag-alloyed CZTSe cell, along with an enhanced open-circuit voltage. These results open up a new avenue for further improving the performances of CZTSe-based device via defect engineering.

Utilization of g-C3N4 as a single photocatalyst material without combination with other semiconductor remains challenging. Herein, we report a facile green method for synthesizing a metal free modified g-C3N4 photocatalyst. The modification process combines four different strategies in a one-pot thermal reaction: non-metal doping, porosity generation, functionalization with amino groups, and thermal oxidation etching. The as-prepared amino-functionalized ultrathin nanoporous boron-doped g-C3N4 exhibited a high specific surface area of 143.2 m2 g−1 which resulted in abundant adsorption sites for CO2 and water molecules. The surface amino groups act as Lewis basic sites to adsorb acidic CO2 molecules, which can also serve as active sites to facilitate hydrogen generation. Besides, the simultaneous use of ammonium chloride as a dynamic gas bubble template along with thermal oxidation etching efficiently boosts the delamination of the g-C3N4 layers to produce ultrathin sheets; this leads to stronger light–matter interactions and efficient charge generation. Consequently, the newly modified g-C3N4 achieved selective gas-phase CO2 reduction into CO with a production yield of 21.95 µmol g-1, in the absence of any cocatalyst. Moreover, a high hydrogen generation rate of 3800 µmol g-1 h-1 and prominent apparent quantum yield of 10.6% were recorded. This work opens up a new avenue to explore different rational modifications of g-C3N4 nanosheets for the efficient production of clean energy.

Layered MoS2 is considered as one of the most promising two-dimensional photocatalytic materials for hydrogen evolution and water splitting; however, the electronic structure at the MoS2-liquid interface is so far insufficiently resolved. Measuring and understanding the band offset at the surfaces of MoS2 are crucial for understanding catalytic reactions and to achieve further improvements in performance. Herein, the heterogeneous charge transfer behavior of MoS2 flakes of various layer numbers and sizes is addressed with high spatial resolution in organic solutions using the ferrocene/ferrocenium (Fc/Fc+) redox pair as a probe in near-field scanning electrochemical microscopy, i.e. in close nm probe-sample proximity. Redox mapping reveals an area and layer dependent reactivity for MoS2 with a detailed insight into the local processes as band offset and confinement of the faradaic current obtained. In combination with additional characterization methods, we deduce a band alignment occurring at the liquid-solid interface.