Photolysis Dynamics Laser Chemistry Lab

Recent experimental and theoretical advances in the study of the dissociation of excited molecules are revealing unexpected mechanisms, when their outcomes are tackled by combining (i) space-time ion imaging of translational features, with (ii) spectroscopic probing of rotational and vibrational distributions; crucial is the assistance of (iii) the quantum chemistry of structural investigations of rearrangements of chemical bonds, and of (iv) the simulations of molecular dynamics to follow the evolution of selective bond stretching and breaking. Here we present results of such an integrated approach to methyl formate, HCOOCH3, the simplest of esters; the main focus is on the rotovibrationally excited CO (v = 1) product and in general on the energy distribution in the fragments. Previous laser studies of dissociation into CO and CH3OH at a sequence of various wavelengths discovered signatures of a roaming mechanism by the late arrival of CO (v = 0) products in time-of-flight ion imaging. Subsequent detailed investigations as a function of excitation energy provided the assessment of the threshold, which opens for triple breakdown into CO and further fragments H and CH3O, as spectroscopically characterized by ion imaging and FTIR respectively. Accompanying quantum mechanical electronic structure calculations and classical molecular dynamics simulations clarify the origin of these fragments through "roaming" pathways involving incipient radical intermediates at energies below the triple fragmentation threshold: a specific role is played by nonadiabatic transitions at a conical intersection between ground and excited states; alternative pathways focalize our attention to regions of the potential energy surfaces other than those in the neighbourhoods of saddle points along minimum energy paths: eventually this leads us to look for avenues in reaction kinetics beyond those of venerable transition state theories. This journal is © The Royal Society of Chemistry.

Evanescent wave cavity ring-down absorption spectroscopy is applied to investigate thermodynamics, kinetics, orientation of the substrates on the surface, probe critical hemimicelle concentration of surfactants, and examine interaction and binding kinetics of DNA strands. © 2014 OSA.

This study discusses the prospect of using biomass waste material, such as Cassia fistula (golden shower) fruit, as a carbon precursor in the development of new carbon material for the sustainable electrochemical sensor application. We successfully synthesized platinum-rhenium nanoparticles decorated on a porous activated carbon (Pt-Re NP/PAC) nanocomposite through the incorporation of metal precursors such as platinum(II) acetylacetonate (Pt(acac)2) and dirhenium decacarbonyl (Re2(CO)10) via a facile thermal reduction process. A variety of physicochemical and electrochemical methods were employed to characterize the morphology, structural, and electrochemical properties of the Pt-Re NP/PAC material. We then looked into the analytical behavior and applications of GCE modified with Pt-Re NP/PAC (Pt-Re NP/PAC/GCE) for the determination of furazolidone (chemotherapy drug) by employing different voltammetric techniques. The influence of experimental conditions such as scan rate, pH, accumulation time, amount of the modifier, and sample concentration on the peak current of the furazolidone was studied. The proposed drug sensor exhibited a wide linear range (WLR) for furazolidone in 0.05 M phosphate-buffered saline (PBS, pH 7.0) from 1.0 to 299 μM with a limit of detection (LOD) of 75.5 nM and appreciable sensitivity (5.52 μA μM-1 cm-2) which were calculated from linear sweep voltammetry (LSV). In addition, these analytical parameters including WLR, sensitivity, and LOD were estimated to be 0.2-117.7 μM, 19.20 μA μM-1 cm-2, and 20.8 nM and were obtained using differential pulse voltammetry (DPV). Therefore, the prepared Pt-Re NP/PAC modified sensor could be a potential candidate for the determination of furazolidone in pharmaceutical formulation, human urine, and blood serum samples, and the results are appreciable. Copyright © 2020 American Chemical Society.

Rotational energy transfer (RET) by Ar collisions within the v′ = 0 level of the SH A2Σ+ state is probed using a laser-induced dispersed fluorescence technique, following photodissociation of H2S at 248 nm. The Ar pressure is adjusted appropriately to allow for significant observation of the single-collision induced RET process. The spin-resolved and spin-averaged rate constants are then evaluated with the aid of a kinetic model under single-collision conditions. The theoretical counterparts are calculated using a quantum scattering method, in which a newly fitted potential energy function is based on ab initio potential energy surface reported previously. The experimental and theoretical kinetic data are essentially consistent in the trend of N and ΔN dependence. Several propensity rules are found in the RET collisions. For instance, for ΔN = 1, 2, and 3, the rate constants decrease with increasing N or ΔN. Given a fixed ΔN, the rate constants of the same initial N in the downward transition appear to be larger than those in the upward transitions. In ΔN = 0, the F2 → F1 transitions prevail over the F 1 → F2 transitions (F1 = N + 1/2, F 2 = N - 1/2), whereas in ΔN ≠ 0, the fine-structure- conserving collisions are more favored than the fine-structure-changing collisions. The principle of microscopic reversibility is also examined for both experimental and theoretical kinetic data, showing that translational energies of the RET collisions are close to thermal equilibrium at room temperature. The propensity rules may be rationalized according to this principle. © 2010 the Owner Societies.

The multiple sensing capabilities of molybdenum disulfide quantum dots (MoS2 QDs) towards metal ions were scrutinized by tuning their surface functional groups. The MoS2 QDs surface was individually modified with thiol-containing capping agents to form carboxylic-, amine- and thiol-functionalized MoS2 QDs (MoS2/COOH, MoS2/NH2 and MoS2/SH) by the facile hydrothermal method. Each as-prepared QDs exhibits strong excitation wavelength dependent fluorescence behavior. The design of MoS2 QDs based metal ion sensor was implemented based on the fluorescence turn-on mechanism. These MoS2/COOH, MoS2/NH2 and MoS2/SH QDs sensors exhibit superior performance towards the highly selective detection of Co2+, Cd2+ and Pb2+ ions, respectively, due to the varied association of each functional group towards metal ions. The resultant detection limit of Co2+, Cd2+ and Pb2+ was evaluated to be 54.5, 99.6 and 0.84 nM, respectively, and the related fluorescence turn-on mechanism is verified unambiguously. The binding energies were calculated for QDs with metal ions pairs and the results lent support to the determined sensitivity. The as-prepared QDs were also successfully demonstrated to detect the above metal ions in real water samples. While becoming potential candidates in the chemosensors based on the fluorescence probe, these surface modified MoS2 QDs can offer an excellent sensing capability for specific metal ions with extremely high selectivity.

Acid-functionalized mesoporous carbons (AF-MPCs) have been synthesized and used as adsorbents for removal of an azo dye, Eriochrome Black-T (EBT), from aqueous solution. To generate acid surface functionalities, mesoporous carbons (MPCs) were treated with sulfuric acid. Characterization of the samples was analyzed by XRD, Raman spectra, N 2 adsorption-desorption, FE-TEM, TGA, and FT-IR studies. The adsorption studies were carried out under various parameters, such as pH, adsorbent dosage, contact time, initial dye concentration solution temperature, and salt concentration. The results showed that the EBT adsorption onto samples was affected by the pH of solution; the maximum EBT ion adsorption took place at pH 1; and the adsorption uptake was increased with an increase in the initial dye concentration. Moreover, the mechanism of adsorption was investigated using kinetic, diffusion, and isotherm models. The best fit was obtained by the Langmuir model with high correlation coefficients (R 2 = 0.9463) with a maximum monolayer adsorption capacity of 117.0 mg·g -1 . The adsorbed anionic EBT dye molecules were eluted by ethanol solvent with the recovery percentage of 98%. Moreover, this study demonstrates that AF-MPCs can be successfully used as a low-cost adsorbent for the removal of EBT from aqueous solutions. © 2019 American Chemical Society.

n/a

By using time-resolved Fourier-transform infrared emission spectroscopy, the fragments of HCN(v 1, 2) and CO(v 1-3) are detected in one-photon dissociation of acetyl cyanide (CH 3COCN) at 308 nm. The S 1(A ″), 1(n O, π CO) state at 308 nm has a radiative lifetime of 0.46 ± 0.01 μs, long enough to allow for Ar collisions that induce internal conversion and enhance the fragment yields. The rate constant of Ar collision-induced internal conversion is estimated to be (1-7) × 10 -12 cm 3 molecule -1 s -1. The measurements of O 2 dependence exclude the production possibility of these fragments via intersystem crossing. The high-resolution spectra of HCN and CO are analyzed to determine the ro-vibrational energy deposition of 81 ± 7 and 32 ± 3 kJmol, respectively. With the aid of ab initio calculations, a two-body dissociation on the energetic ground state is favored leading to HCN CH 2CO, in which the CH 2CO moiety may further undergo secondary dissociation to release CO. The production of CO 2 in the reaction with O 2 confirms existence of CH 2 and a secondary reaction product of CO. The HNC fragment is identified but cannot be assigned, as restricted to a poor signal-to-noise ratio. Because of insufficient excitation energy at 308 nm, the CN and CH 3 fragments that dominate the dissociation products at 193 nm are not detected. © 2012 American Institute of Physics.

By employing time-resolved Fourier transform infrared emission spectroscopy, the fragments HCl (v=1-3), HBr (v=1), and CO (v=1-3) are detected in one-photon dissociation of 2-bromopropionyl chloride (CH3CHBrCOCl) at 248 nm. Ar gas is added to induce internal conversion and to enhance the fragment yields. The time-resolved high-resolution spectra of HCl and CO were analyzed to determine the rovibrational energy deposition of 10.0A ±0.2 and 7.4A ±0.6 kcal mol-1, respectively, while the rotational energy in HBr is evaluated to be 0.9A ±0.1 kcal mol-1. The branching ratio of HCl(v>0)/HBr(v>0) is estimated to be 1:0.53. The bond selectivity of halide formation in the photolysis follows the same trend as the halogen atom elimination. The probability of HCl contribution from a hot Cl reaction with the precursor is negligible according to the measurements of HCl amount by adding an active reagent, Br2, in the system. The HCl elimination channel under Ar addition is verified to be slower by two orders of magnitude than the Cl elimination channel. With the aid of ab initio calculations, the observed fragments are dissociated from the hot ground state CH3CHBrCOCl. A two-body dissociation channel is favored leading to either HCl+CH3CBrCO or HBr+CH2CHCOCl, in which the CH 3CBrCO moiety may further undergo secondary dissociation to release CO. © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

In this study, 2D graphene oxide nanosheets (GONS) were synthesized and characterized by XRD, Raman, SEM, FE-SEM, TEM, XPS, TGA, UV-vis and FTIR spectral techniques. The efficiency of eosin yellow (EY) dye adsorption on the GONS under various experimental parameters such as contact time, pH and temperature was investigated. Adsorption kinetic data were characterized appropriately using pseudo second-order-kinetics and intraparticle diffusion methods. Free energy of adsorption (ΔG0), enthalpy (ΔH0), entropy (ΔS0) changes, activation energy and Arrhenius factors were also calculated. The endothermic and spontaneous nature of the adsorption process was confirmed by the positive value of the enthalpy change (ΔH0) and the negative value of free energy change (ΔG0). The adsorption mechanism was investigated by FTIR spectra of GONS before and after adsorption of EY dye molecules. The remarkable adsorption capacity of EY onto the GONS can be attributed to the various adsorption interaction mechanisms such as hydrogen bonding, π-π electron, and electrostatic interactions. The maximum adsorption capacity for EY was calculated to be 217.33 mg g-1. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim

Atomic halogen elimination from halogen-related compounds plays a vital role in the depletion of the ozone layer and is well investigated. However, the probabilities for elimination of molecular halogens and hydrogen halides are rarely scrutinised. We develop distinct method for the investigation of each kind of fragment. Velocity-mapping ion-imaging was employed to study the atomic halogen elimination from alkyl halides and aryl halides, focusing on the fractions of the translational energy release, the quantum yields of the atomic fragments, transition probability for curve crossing, competitive halogen-related bond fission, and anisotropy parameters to understand their dynamical complexity. Cavity ring-down absorption spectroscopy was implemented to investigate the molecular halogen fragments dissociated from the aliphatic halides and acyl halides for their optical spectra, vibrational branches, quantum yields, and the dissociation mechanisms. Time-resolved Fourier transform infrared emission spectroscopy was employed to confine the primary products of hydrogen halide elimination from acyl halides in the presence of Ar gas. It is, for the first time, to overview these existing small halogen-related fragments eliminated from halogen-containing compounds. The detailed characterisation of these fragments should unveil complicated halogen-related dissociation mechanisms which may supplement the current knowledge and help with the photochemical assessment of halogen-related environmental issue. © 2020 Informa UK Limited, trading as Taylor & Francis Group.

Molecular orientation is a fundamental requisite in the study of stereodirected dynamics of collisional and photoinitiated processes. In this past decade, variable hexapolar electric filters have been developed and employed for the rotational-state selection and the alignment of molecules of increasing complexity, for which the main difficulties are their mass, their low symmetry, and the very dense rotational manifold. In this work, for the first time, a complex molecule such as 2-bromobutane, an asymmetric top containing a heavy atom (the bromine), was successfully oriented by a weak homogeneous field placed downstream from the hexapolar filter. Efficiency of the orientation was characterized experimentally, by combining time-of-flight measurements and a slice-ion-imaging detection technique. The application is described to the photodissociation dynamics of the oriented 2-bromobutane, which was carried out at a laser wavelength of 234 nm, corresponding to the breaking of the C-Br bond. The Br photofragment is produced in both the ground Br (2P3/2) and the excited Br (2P1/2) electronic states, and both channels are studied by the slice imaging technique, revealing new features in the velocity and angular distributions with respect to previous investigations on nonoriented molecules. © 2016 American Chemical Society.

Carbon mesoporous materials (CPMs) have great potential in the field of heterogeneous catalysis. Highly dispersed ruthenium nanoparticles (RuNPs) embedded in three dimensional (3D) CPMs as catalysts with a high surface area (1474 m2 g-1) were prepared by microwave-thermal reduction processes. Characterization technologies including X-ray diffraction (XRD), N2 adsorption/desorption isotherm measurements, field emission transmission electron microscopy (FE-TEM), thermogravimetric analysis (TGA), hydrogen temperature-programmed reduction (H2-TPR), Raman spectroscopy and 13C solid state cross polarization and magic angle spinning (13C CP/MAS) NMR spectroscopy were utilized to scrutinize the catalysts. It was revealed that the Ru/CPM catalysts exhibited a highly ordered 3D mesoporous structure and a large surface area and were widely used as catalysts for reduction reactions. Reduction of p-nitroaniline (p-NA) and crystal violet (CV) using NaBH4 with the use of this catalyst was studied by means of UV-vis spectroscopy. Here, NaBH4 acts as a hydrogen donor. This catalyst shows an excellent catalytic activity towards reduction of p-NA and CV dye at room temperature. Due to the promising properties of CPMs, they can be utilized to fabricate 3D carbon-based materials for a variety of novel applications. © The Royal Society of Chemistry 2015.

Polynorbornenes appended with anthracene and chiral alanine linkers are synthesized. Hydrogen bonding between the adjacent bisamidic linkers brings adjacent anthracene chromophores in a more suitable orientation for exciton coupling and renders one-handed helical structures for these polymers. Excimer formation is observed from their emission spectra. Monoamidic linkers provide only one hydrogen bond, which would be less robust and result in much lower circular dichroic response. Hydrogen bonding between the adjacent chiral alanine linkers brings appended anthracene in a more suitable orientation for exciton coupling and excimer formation, rendering one-handed helical structures in polynorbornenes. © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Following single-photon dissociation of CH2I2 at 248 nm, I2 molecular elimination is detected by using cavity ring-down absorption spectroscopy. The technique comprises two laser beams propagating in a perpendicular configuration, in which a tunable laser beam along the axis of the ring-down cell probes the I2 fragment in the B 3 ou + - X 1 g + transition. The nascent vibrational populations for v 0, 1, and 2 levels are obtained with a population ratio of 1:(0.65 0.10):(0.30 0.05), corresponding to a Boltzmann-like vibrational temperature of 544 73 K. The quantum yield of the ground state I2 elimination reaction is determined to be 0.0040 0.0025. With the aid of ab initio potential energy calculations, the pathway of molecular elimination is proposed on the energetic ground state CH2I2 via internal conversion, followed by asynchronous three-center dissociation. A positive temperature effect supports the proposed mechanism. © 2011 American Institute of Physics.

A multi-center impulsive model has been recently developed to characterize the dynamic feature of product energy distribution in photodissociation of formaldehyde, H2CO → CO + H2. (J. Phys. Chem. A, 2015, 119, 29) The model is extended to predict the vector correlations among transition dipole moment μ of the parent molecule, recoil velocity v and rotational angular momentum j of the fragments produced via the transition state (TS) and roaming path. The correlation results of μ-j, j-j and μ-v vectors of the fragments are consistent with those reported using quasi-classical trajectory simulation on the global potential energy surface. In contrast to the TS route, the vector properties via the roaming path are loosely correlated. This work offers an alternative method to study stereodynamics of the photodissociation process, and is conducive to clarifying the origin of photofragment vector correlation especially for the roaming pathway. This journal is © the Owner Societies.

Without the need to construct complicated potential energy surfaces, a multicenter impulsive model is developed to characterize the dynamical feature of conventional transition state (TS) and roaming pathways in the photodissociation of formaldehyde, H2CO → CO + H2. The photofragment energy distributions (PED) resulting from the roaming mechanism are found to closely correlate to a particular configuration that lies close to the edge of the plateau-like intrinsic reaction coordinate, whereas such a PED is associated with the configuration at the saddle point when the conventional TS pathway is followed. The evaluated PED results are consistent with those by experimental findings and quasi-classical trajectory calculations. Following impulsive analysis, the roaming pathway can be viewed as a consequence of energy transfer events between several vibrational modes. For H2CO, the available energy initially accumulated at the C-H bond is transferred to other transitional mode(s) via stretching-bending coupling, and finally to the HH stretching. (Chemical Presented). © 2014 American Chemical Society.

Evanescent wave-cavity ring-down spectroscopy (EW-CRDS) is employed to characterize micellization of anionic surfactants and the related capability of removing cationic substance off the silica surface. Crystal violet (CV +) cationic dye is used as a molecular probe to effectively determine critical hemimicelle concentration (HMC) of surfactants on the surface. The HMC results are 1×10 -2, 4×10 -3, 8×10 -4, and 2.5×10 -4mol/L for sodium sulfate salts with a carbon-chain length of C-10, C-12, C-14, and C-16, respectively. A stronger hydrophobic interaction results in a less concentration required to undergo micellization. The HMC values on the surface are about half of those in solution. When NaCl solution is added, the electrolyte helps reduce the electrostatic repulsion between the anionic sulfate heads to facilitate the surfactant aggregation, and thus, the subsequent HMC is reduced. Furthermore, the probable phase change for dye-surfactant interactions on the surface at the concentration below HMC is observed, and the desorption rates of CV + are measured as a function of concentration and carbon-chain length of surfactants above HMC. Given each surfactant concentration at its respective HMC, the corresponding desorption rates are along the order of C-12<C-14<C-16<-C-10. The trend may be realized by two competing factors of hemimicelle size and number density. The consequences help with understanding how to apply surfactant in the chromatographic separation. © 2012 Elsevier Inc.

Electron transfer (ET) kinetics of CdSe/ZnS core/shell quantum dots (QDs) on bare coverslips and a TiO 2 nanoparticle-coated thin film has been investigated at the single-molecule level. The QDs prepared have three different diameters of 3.6, 4.6, and 6.4 nm. The trajectories of fluorescence intensity are acquired with respect to the arrival time. The on-time events and subsequent fluorescence lifetimes are shorter with decreasing size. Given the lifetime measurements for QDs on glass and TiO 2, the rate constant of ET from QDs to TiO 2 may be determined to be 1.3×10 7, 6.0×10 6, and 4.7×10 6 s -1 for the increasing sizes of the QDs. The plot of on-time probability density versus arrival time is characterized by power-law statistics in the short time region and a bending tail in the long time region. Marcus's ET model is employed to satisfactorily fit the bending tail behavior and to further calculate the ET rate constants. The theoretical counterparts for the different sizes are 1.4×10 7, 6.4×10 6, and 1.9×10 6 s -1, showing good agreement with the experimental results. Going dotty: Electron transfer kinetics of CdSe/ZnS core/shell quantum dots (QDs) on bare coverslips and on TiO 2 nanoparticle coated thin films have been investigated at the single-molecule level. As the size of the QDs changes, the shift in the valence band (VB) energy is less significant than the shift in the conduction band (CB) energy. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

We utilize single molecule spectroscopy combined with time-correlated single-photon counting to probe electron transfer (ET) kinetics from CdSe/ZnS (core/shell) quantum dots (QDs) to TiO2 through various lengths of linker molecules. The QD-linker-TiO2 complexes with varied linker length, linker structure, and QD size are fabricated by a surface-based stepwise method to show control of the rate and of the magnitude of fluctuations of photo-induced ET at the single molecule level. The ET rate constants are determined to be 2.8×107, 1.9×107, and 3.5×106s-1 for the chain length of 1.5, 6.2 and 13.8Å, respectively. The electronic coupling strengths between QDs and TiO2 are further calculated to be 3.68, 3.60, and 1.59cm-1 for the three different chain lengths by using the Marcus ET model. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Evanescent-wave cavity ring-down spectroscopy is applied to investigate the adsorption behavior of rhodamine B at three different interfaces. The adsorption equilibrium constant (Kads) and adsorption free energy of rhodamine B at the silica/methanol interface are determined to be (1.5 ± 0.2) × 104 M-1 and -23.8 ± 0.4 kJ/mol by use of a Langmuir isotherm model. A Langmuir-based kinetic model is also developed to determine the corresponding adsorption and desorption rate constants of (1.02 ± 0.03) × 102 M-1 s-1 and (7.1 ± 0.2) × 10-3 s-1, from which Kads is obtained to be (1.45 ± 0.09) × 104 M-1, in agreement with the value determined under equilibrium conditions. Similarly, when rhodamine B is at the chlorotrimethylsilane-immobilized silica/methanol interface, the adsorption and desorption rate constants are determined to be (1.7 ± 0.2) × 102 M-1 s-1 and (5.0 ± 1.0) × 10-3 s-1· The subsequent Kads is (3.6 ± 0.4) × 104 M-1, which is larger than that at the silica/methanol interface. The former adsorption is dominated by hydrophobic interaction, while the latter is subject to electrostatic attraction. When rhodamine B is at the silica/water interface, there exist three chemical forms, including zwitterion (R+B -), cation (RBH+), and lactone (RBL). A combination of double-layer and Langmuir competitive models is used to fit the adsorption isotherm as a function of solution pH, yielding Kads of (2.5 ± 0.2) × 104 M-1 and (1.1 ± 0.2) × 105 M-1 for R+B- and RBH +, respectively. RBL is considered to have the same Kads value as R+B-. © 2010 American Chemical Society.

We report the use of palladium nanoparticles (Pd NPs) immobilized on m-aminophenol/formaldehyde resin (APF)-derived porous carbon spheres (Pd@PCS) as heterogeneous catalysts for the reduction of organic dyes. The morphology, structure, surface compositions, and textural properties of PCS and the Pd@PCS catalyst were characterized fully to document the excellent catalytic efficiency of Pd@PCS composites. Pd NPs of mean particle size ca. 12 ± 0.8 nm were highly dispersed on the surface of PCSs, and possessed surface area and pore volume as high as 896.3 m2 g-1 and 0.934 cm3 g-1, respectively. Prepared catalysts were applied to the reduction of various organic dyes; high catalytic activity towards crystal violet, eosin yellow and sunset yellow was observed. More importantly, the catalysts could be recovered readily, and reused many times with good stability. Therefore, the robust material utilized for the treatment of containing organic dyes could be used widely for environmental applications. © 2018 the Partner Organisations.

We report a ratiometric fluorescent metal ion sensor based on the mechanism of fluorescence resonance energy transfer (FRET) between synthesized 15-crown-5-ether capped CdSe/ZnS quantum dots (QDCE) and 15-crown-5-ether attached rhodamine B (RBCE) in pH 8.3 buffer solution. Fluorescence titration with different metal ions in pH 8.3 buffer solution of the QDCE-RBCE conjugate showed a decrease and an increase in the fluorescence intensity for QDCE and RBCE moieties respectively due to FRET from QDCE to RBCE. This sensor system shows excellent selectivity towards K+ ions resulting in increasing efficiency of FRET. Energy transfer efficiency depends on the affinity between metal ions and crown ether functionalized with QDCE/RBCE. The detailed analysis of FRET was explored. This water soluble ratiometric sensor system can act as a good FRET probe for sensing applications especially in biological systems. © The Royal Society of Chemistry 2015.

Abstract The nanohybrids of noble metal (M=Ag, Au, Pd, Pt, and Ru) nanoparticle-decorated rhenium disulfide nanosheets (ReS2 NSs) were demonstrated as excellent catalysts towards the reduction of aromatic nitro compounds. The M/ReS2 nanohybrids were synthesized by facile hydrothermal method and characterization results proved that each metal nanoparticle was anchored on the ReS2 NSs. These nanohybrids exhibited superior catalytic performance towards the reduction of aromatic nitro compounds including 4-nitrophenol, 2-nitroaniline, and nitrobenzene. Interestingly, the Ru/ReS2 and Pd/ReS2 showed enhanced catalytic reduction compared to Ag/ReS2, Au/ReS2, and Pt/ReS2 and also showed significant catalytic stability due to metal nanoparticles anchored strongly on the surface of ReS2 NSs. Moreover, these M/ReS2 nanohybrids turned out to have much better catalytic performance compared to noble metal nanoparticle-based catalysts. A plausible reduction mechanism was proposed for each nitro compound. It was verified that the metal-nanoparticle-mediated hydrogen transfer was involved in the reduction of nitro compounds to amines. This report demonstrates the catalytic activities for metal nanoparticle-decorated ReS2 nanohybrids, which can serve as a paradigm to open up a future trend in the design of transition metal dichalcogenides nanohybrids as superior catalysts.

The primary elimination channel of bromine molecule in one-photon dissociation of CH2BrC(O)Br at 248 nm is investigated using cavity ring-down absorption spectroscopy. By means of spectral simulation, the ratio of nascent vibrational population in v 0, 1, and 2 levels is evaluated to be 1:(0.5 ± 0.1):(0.2 ± 0.1), corresponding to a Boltzmann vibrational temperature of 581 ± 45 K. The quantum yield of the ground state Br2 elimination reaction is determined to be 0.24 ± 0.08. With the aid of ab initio potential energy calculations, the obtained Br2 fragments are anticipated to dissociate on the electronic ground state, yielding vibrationally hot Br2 products. The temperature-dependence measurements support the proposed pathway via internal conversion. For comparison, the Br2 yields are obtained analogously from CH3CHBrC(O)Br and (CH3)2CBrC(O)Br to be 0.03 and 0.06, respectively. The trend of Br2 yields among the three compounds is consistent with the branching ratio evaluation by Rice-Ramsperger-Kassel-Marcus method. However, the latter result for each molecule is smaller by an order of magnitude than the yield findings. A non-statistical pathway so-called roaming process might be an alternative to the Br2 production, and its contribution might account for the underestimate of the branching ratio calculations. © 2012 American Institute of Physics.